Painted or polished billet pieces.

[dagen_1]

I will get some better pictures of the scratches this afternoon, some of the pieces are pretty rough. I almost need some sort of sander with a fine sand paper on it.

sand, wet sand, then start cutting and buffing. (and then seal it so you don't have to do it again anytime soon)

 

[Devs93]

wetsand with like 1500 or 1000 grit?

 

[dagen_1]

wetsand with like 1500 or 1000 grit?

yeah... 1500, maybe follow that with some 2000. then break out the compounds. brown, then white.

i'd hate to polish those pieces myself for one reason.... how the heck are ya gonna hold 'em still while you have the buff against it. it'd be easy to have a small part to fly out of your hand and get bent.... a vice is outta the question unless you're very careful.

 

[///RAGMC]

Find a polisher and have them done mine looked just like that when i got them

 

[WPsharpshooter]

To much work to make it look good, Ill give you 50 bucks for all of them...

 

[MOBS]

If you sand them, use a very fine grit belt sander to finish-sand them in 1 direction, that'll give you the single directional brushed look.

 

[rccoco]

Id say polished

 

[Pierced]

Pics of some of the better pieces.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[radical7]

clean have them chromed then powdercoated candy red.

 

[radical7]

or this
http://www.duplicolor.com/products/metalCast/