NEED A ROUGH MEASUREMENT PLEASE

[JBLOOM33]

Can somone PLEASE tell me a rough measurement off their truck bagged w 22s.. I need to know how high you cut above the wheel well in the bed after you remove the stock wheel wells so its not grossly over cut (so from the floor to the highest point in the center).. I dont have any help w moving my bed to do the cut a lil and check method.. any help would be appreciated ..thx

 

[JBLOOM33]

anybody? somebody?

 

[blue_92_sierra]

Corey's old black rcsb bed.. He laid frame on 22's

You must be registered for see images attach

 

[e3mcgrath]

i would go a just lil higher than those.... and keep in mind tire size. i did those for 255/35s

 

[98nightmare]

If you remove the factory ones you should be able to see the tire and trim as needed. Shouldnt have to remove the bed...

 

[JBLOOM33]

ok i have already removed the stock fenders and cleaned it all up.. im running 265/35/22 but i have not tried to fit it yet.. i figured it would end up sitting on the tire so i would have to remove it to cut it higher and clean it up