Low mile 1999 L29 parts for sale

[Scottm]

Stock parts from a 99 with low miles, reportedly 20k. Stock timing set, 3/8 inch pushrods, beehive valve springs and rotators. Give me $30 for shipping and you can have it all.

 

[Scottm]

Also I had the stock low-mile cam reground at Delta for more lift, duration, a narrower lobe separation angle and more advance. Duration is 206/210 at .050 and lift is .509/.522. Not as good as the comp cams 01-411 that I went with, but it's $250 less and far better than stock. It will require an adjustable valvetrain though, because the stock base circle was reduced a bit to reshape the lobes. Asking $80 plus $20 shipping.

Mods relocate this thread if needed..

 

[Scottm]

Here is the cam, super clean, no wear on the dist gear.

 

[Scottm]

And here is the stock black box 1997 ecm from my k3500 dually, L29/4l80E. This will work for 96 and 97, the 98 is different. I forgot to get the part number off it, so I will update this tomorrow. Vin for the truck is 1GCHK39J7VE120xxx. $40

 

[BNielsen]

I may reach out about the cam in the next couple weeks; I need to get my eyes examined for new glasses and contact lenses and my wife's car needs fixed but I may be interested in the cam as well as the timing gear, springs and push rods.

 

[618 Syndicate]

Off topic a bit, but how was your experience with Delta?

 

[Scottm]

Delta is awesome. I have sent cams there twice. Fast turnaround and great work.

 

[618 Syndicate]

Delta is awesome. I have sent cams there twice. Fast turnaround and great work.

Thank you.