Austin
Newbie
Eh there I'm new to the site. Would like to see your guy's light bar mounts/locations. I'm planning on mounting two 32" bars behind my tahoes grille. Any pointers or other suggestions would be great or just show what you have.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Welcome
I haven't done this but I've seen a couple people with the light bar behind the grill, 2 problems with that, 1 is spacing, depending on you light bars u may need to trim the fins to ensure they fit. 2 is they block air flow, some people have done 1 bar and they're fine but I would be thinking that 2 bars will just be blocking the air flow
Looking at ur grill one option is to cut the center section out, where the chevy logo is and place one bar there, I've thought abt doing that. Or cutting out the top and bottom sections and placing them there, of course that'll require some molding, also would be good to swap out the grille to a different style so you dnt have that center cross piece that blocks air flow depending on which way you went.
Oh wow, I love that idea. How did you mount and wire them. And where did you get the halo turn signals. ThxSince I have led halo turn signals I was able to put 12" bar behind the lense
You must be registered for see images attach
Ebay they are orical lights kinda expensive for what they are. $170 for 2 sets or $150 for 1 set so I got the 2 in case I mess 1 up. The wiring for the halos is done through a relay which is triggered by the little marker lights in the corner of the grill so the halos would be off when I had my heads lights off and blink on or if I had the heads lights on the halos would be on but blink off the light bar is mounted to a peice of plexiglass that is cut to the same size of the outer lensesOh wow, I love that idea. How did you mount and wire them. And where did you get the halo turn signals. Thx