Mike Franklin
Newbie
Ugh, I have to pickup my kids tonight and my truck is freaking out. 1997 suburban, just got done doing the ac and heater cores, put the dash back together, fired it up, was working fine. Drove it around a bit then parked. Hour later I started it up, backed down the drive way, turned the wheel, put it in d, hit the gas, entire truck shut down. No start condition. Waited a few started up, stumbled, died. Did this 2 more times till I straightened out the wheel, aimed to pull back in the driveway, and was able to pull in. Starts now no problem. Wipers work, but no blinkers, no turn signals, no hazard, not sure about cruise. 3rd tail light works. Guys I'm exhausted after doing this job, can anyone point me to right place to start hunting this issue my brain is fried. No blown fuses.
Reseat the big molex plug that has the main wire harness down the column maybe? Thats all I can come up with.
Reseat the big molex plug that has the main wire harness down the column maybe? Thats all I can come up with.