Front Diff bushings and diff bracket bushings

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

94K3500PROJECT

I'm Awesome
Joined
Aug 29, 2020
Messages
215
Reaction score
244
Location
NE IN
I must be not looking in the right places but I need bushings for the front diff and front diff q aaaaaa

Any help pointing me in the right direction is appreciated!
 

Attachments

  • 2FBA77D6-5DD3-4C91-804F-7F3A0716B270.jpeg
    2FBA77D6-5DD3-4C91-804F-7F3A0716B270.jpeg
    677.3 KB · Views: 91
  • B58C66F3-F3AD-45C3-9575-83A2949A4EC0.png
    B58C66F3-F3AD-45C3-9575-83A2949A4EC0.png
    1.7 MB · Views: 87

Jesse_Wenting

Old Thread Reviver
Joined
Feb 5, 2020
Messages
335
Reaction score
406
Location
Kingston, Ontario
Been in the same predicament for a while now. Only thing I can find is this but I don't know if those are for the diff assembly, the removable brace on the passenger side (the thing in your one photo), or both. There's almost no info about this online but seeing this post is making me want to figure it out lol
 

94K3500PROJECT

I'm Awesome
Joined
Aug 29, 2020
Messages
215
Reaction score
244
Location
NE IN
Been in the same predicament for a while now. Only thing I can find is this but I don't know if those are for the diff assembly, the removable brace on the passenger side (the thing in your one photo), or both. There's almost no info about this online but seeing this post is making me want to figure it out lol

I’ll try and find more info on those bushings and measure the ones on my diff and bracket later today.
 

Jesse_Wenting

Old Thread Reviver
Joined
Feb 5, 2020
Messages
335
Reaction score
406
Location
Kingston, Ontario
and measure the ones on my diff
Be careful with the aluminium housing. I pulled one with 3.73s so I'd only have to mess with the rear diff when I swap from my factory 3.42 gearing, and I broke the case trying to remove the bushings. Definitely need to brace the housing when trying to drive out the bushings
 

Marauder

Newbie
Joined
Oct 1, 2020
Messages
16
Reaction score
16
Location
Nevada
I believe the the differential bushing is GM # 15962664

BUSHING. Differential Carrier​

Part Number: 15592512 or 15962664

You must be registered for see images attach
 
Last edited:

89BlackPearl

Newbie
Joined
Jan 13, 2024
Messages
2
Reaction score
0
Location
Shelbyville TN
Know thos is an older thread but anyone have a good way to replace these bushings?? My 89 for reference
You must be registered for see images attach
 

offroadtahoe

Upgrade Obsessed
Supporting Member
Joined
Jul 23, 2021
Messages
428
Reaction score
561
Location
Houston,TX
Know thos is an older thread but anyone have a good way to replace these bushings?? My 89 for reference
You must be registered for see images attach
These are the diff bushings.https://www.rockauto.com/en/moreinfo.php?pk=10372812&cc=1303614&pt=10403&jsn=415
no info on the A-arm bushings
 

caw_86

I'm Awesome
Supporting Member
Joined
May 31, 2022
Messages
1,026
Reaction score
1,894
Location
DFW, Texas

15962663 is for 8.25 discontinued, very, limited stock out there, the above link actually has stock. most all other retailers will list it as back ordered. i found one pop up on rock auto as well
15962664 is for 9.25, no idea if they are the same dimensions, but they have different part numbers. this part is still available due to continued usage in the GMT800 line

15592506 8.25 bracket discontinued, no known replacement​

15592512 9.25 bracket discontinued, no known replacement​

im sure there are bushings out there of similar enough size to replace the bracket bushing with but no idea what the dimensions are
 

Coppergrey98

Newbie
Joined
Sep 26, 2025
Messages
1
Reaction score
0
Location
Canada
I was looking into this while prepping for my frame swap. I didn't get precise measurements but one of the lower control arm bushings from a 4x4 looks like it would fit the differential with some modification. The OD is very close, the overall length would have to be shortened and the control arm bolt is larger. You could either make a spacer for the original bolt or drill out the frame holes and use the larger bolt.

Didn't look at the mounts on the steel link because mine are usable.
 

Forum statistics

Threads
78,094
Messages
1,644,974
Members
81,232
Latest member
schlosser8601
Top