jkeaton
It’s been real
OK, Looking for some advice finally....I've looked at dozens of youtube videos regarding he window regulator access/replacement. A few weeks ago,my drivers side all the sudden decided to quit working. It is stuck in the up position. After fiddling with it for awhile, it managed to roll down, but rolling back up it kept getting stuck and I'd have to pull on the front edge of the glass, something would pop and it would continue to go up. I lived with it for awhile as it looks like a total PIA to access the regulator assembly. But now it wont roll down at all. I've checked the switch, it gets power and the motor gets power. It's just stuck in the up position. If you've ever worked on this before, you know the window has to be down to get that inner panel containing the regulator off. I took the outer panel off over the weekend and tried to pry, hammer, push, pull, etc to see if I could get the window to lower. Used an inspection mirror and observed the rollers are still in the tracks. The dang thing just wont move so I can pull that panel off. Any advice besides trying to find a complete door assembly to replace it with? Can the window be lowered manually somehow?