1tinindian
Newbie
- Joined
- Oct 26, 2014
- Messages
- 11
- Reaction score
- 0
I just replaced the fuel pump on my 98 2wd long bed.
I removed the driveshaft to gain the extra room I was looking for to drop the tank.
Prior to this, no vibrations.
The driveshaft was a fight getting the slip yoke back into the trans. but it finally slid in.
Now, a slight vibration can be felt @ highway speeds(60-70 mph).
This truck has the factory aluminum shafted and new u-joints.
Any ideas as to why it's vibrating?
I have since turned the rear pinion yoke 180 degrees with no improvement.
Leon
I removed the driveshaft to gain the extra room I was looking for to drop the tank.
Prior to this, no vibrations.
The driveshaft was a fight getting the slip yoke back into the trans. but it finally slid in.
Now, a slight vibration can be felt @ highway speeds(60-70 mph).
This truck has the factory aluminum shafted and new u-joints.
Any ideas as to why it's vibrating?
I have since turned the rear pinion yoke 180 degrees with no improvement.
Leon