TylerZ281500
Yukon Ridin High
hotcam in my opinion isnt really a thumper. and a 3500 stall is way overkill youll never want to drive it daily again.
Considering **** an LT4 Hot cam
- Thread starter RHamill
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
hotcam in my opinion isnt really a thumper. and a 3500 stall is way overkill youll never want to drive it daily again.
RHamill
Ryan
I was being untruthful about the 3500 stall, I will be upgrading stall but not that much.
I will be getting the 1.6 roller rockers to achieve .525 lift with the aforementioned springs, retainers and valve seals, I also will be tuning with either nelson or black bear, 2300-2600 stall. It wont thump like a ***** thumpr, but it will sound good to me and I will gain im assuming around 35-45 horse, and it will give me something to do, and Lord knows I cant keep my hands clean.
I will be getting the 1.6 roller rockers to achieve .525 lift with the aforementioned springs, retainers and valve seals, I also will be tuning with either nelson or black bear, 2300-2600 stall. It wont thump like a ***** thumpr, but it will sound good to me and I will gain im assuming around 35-45 horse, and it will give me something to do, and Lord knows I cant keep my hands clean.
TylerZ281500
Yukon Ridin High
your in michigan too right bud? so dyno tune it at black bear.
Similar threads
