code 32

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

copernicusd

I'm Awesome
Joined
Sep 2, 2011
Messages
225
Reaction score
0
Location
pgh
getting a code 32, only comes up when i drive on the highway
just did cap and plugs, was having rough idle when stopped at lights, that helped, egr has 10,000 miles on, could it be bad already?
did an engine swap 2 or 3 months ago, 3000 miles or so, engine was used, but seems just a little sluggish now compared to when i first swapped
 

copernicusd

I'm Awesome
Joined
Sep 2, 2011
Messages
225
Reaction score
0
Location
pgh
weird thing, just kinda poked around, and it seems to run better, not sure if. imoved a wire or what, just seems like it wants to go now, any ideas, could the egr be bad, or clogged vaccum line that i bumped and freed up?
 

shelbyt.67

Weirdo
Joined
Jun 8, 2012
Messages
2,039
Reaction score
87
Location
Republic of Texas
Your Electrics gound wires are located at the front of the intake manny, behind the alt. Also at the power distibution block on the left side of the fire wall. They get corroded very easily. Check all grounding points and the power terminals in the distro. Get yerself some dialectric grease, clean and coat wire terminals.
 
Top