Bumper filler panel

[polar]

Alright well I finally got around to converting my front end to a new style gmc grill and I noticed that the bottom corners of the grill just flop around. My question is are the bumper filler panels different between a gmc and chevy? If so can you post a picture of the differences

 

[DR CHOP]

If you bought an aftermarket shella then it will be Flimsy compared to an oem shell. No differencE in the Chevy/gmc filler panels between 88-93 or 94-98

 

[polar]

Its an OEM shell, its wierd because only the lower corners move because there is nothing to hold it on

 

[1badgmc]

You should have a screw holding the top of the corner filler to the fender.

 

[DR CHOP]

You should have a screw holding the top of the corner filler to the fender.

Ya, and you may need washers to make up space, I didn't realize you updated still had old style radiator support.

 

[polar]

I have the same style radiator support. My truck is a 98 and the tahoe i got it from is from a 98. The bottom corner that is closest to the bumper flops around. I will get a video tmrw