thunderstruck
Babuinos Móviles
Has anyone had the blower motor relay fail so that none of the speeds work, not just high? I'm having an increasingly intermittent problem where I lose power to the blower motor. Blower switch is brand new, motor and resistor are about five years old. None of the wiring connectors at the switch, resistor, relay or motor are burnt at all. Did some troubleshooting, I think I narrowed it down to the relay; when I put a jumper wire across the harness pins, I could get all speeds. Oddly enough, after I put the relay back in place, the blower started working normally again, after not working for several days. Yes, resistor is still okay, even if it wasn't, it wouldn't explain why high speed wouldn't work.
This is on a 95 with a 96+ controller.
This is on a 95 with a 96+ controller.