Bed fender rust

[whitewheels]

I'm restoring my 8ft bed. It looked like it was in fairly good shape. Classic rust on both wheelarches. Now when I'm about to order those smal wheelarch steel patches I see that on the left side just infront of the arch, just where the bedpanel curls, there's like 14-15" from arch and forward, totaly rusted [emoji19]
The right side going to do just fine with new arch,but the left dosen't cover it by far. Except from a hole bedside($$$) is there other way/panel to fix this?

Skickat från min Honor 8 via Tapatalk

 

[7thdarkangel]

Bring a sawzaw to a pick and pull.

 

[df2x4]

Bring a sawzaw to a pick and pull.

Might be difficult to find a donor truck considering he's in Sweden. I'm not sure how common these trucks are over there.

 

[whitewheels]

No you're right. Pick and pull isn't a concept here in sweden I'm afraid

Might be difficult to find a donor truck considering he's in Sweden. I'm not sure how common these trucks are over there.

Skickat från min Honor 8 via Tapatalk

 

[whitewheels]

Found these.... Send a question to the seller how far front back of the wheel well they strech

You must be registered for see images attach

Skickat från min Honor 8 via Tapatalk

 

[RichLo]

Unfortunately 'certa-fit' is usually sorta-fit. You might just have to settle or do some sheet meal work on them yourself.

 

[Yukon Territory]

Look at this on eBay
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/362268630785

they have these on eBay not a bad deal used them before were pretty nice panels
if you are welding these in yourself make sure you round the corners if you put the patch in Square your bedsides will sink in heavily on the Square edges

 

[whitewheels]

Look at this on eBay
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/362268630785

Now we're talkin'!
Maybe a little to short but could work

Skickat från min Honor 8 via Tapatalk