American Racing - Burnout wheel

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

InsteG8

OBS Enthusiast
Joined
Apr 23, 2012
Messages
51
Reaction score
10
Location
Harris County, TEXAS
There here...... Not to crazy about the lack of lip, thick center sections cut into the hub I assume, you can see how the spoke is stepped where it meets the hub. Also the face has some contour to it, every picture I saw showed to be a flat face, undecided on that.

After reading and reading I ended up going with a 6" backspace on the rear and 5.25" on the front, I wanted a deeper lip on the rear and 6" seemed to be the compromise. The wheel pictured is the front with what would be 3.25" lip, rear should be 4".

Probably drive the hoe down to Discount and have them mock up one side and check fitment apperance, and go from there.......

One great thing is the hub is fully polished not just the face.


You must be registered for see images attach

You must be registered for see images attach
 
Top