Smith
I'm Awesome
- Joined
- Dec 5, 2009
- Messages
- 132
- Reaction score
- 12
Both upper and Lower Links are in boarded inside the frame. They aren't hitting the frame if thats what you are talking about. The links do not bind in any way.Not to be a nit picker, but it appears that the top arms are positioned in a fashion that would limit up-travel of the front axle by around 5 inches or so. If this is acceptable, carry on.
He lasted posted on this in July 2015 - I'd guess this project is already completed based on the rate of progress they had before.
No not done yet. Got REALLY busy at my old job and was working constant 14 hour shifts. Quit that job, but was jobless for about a month and a half so I didn't want to spend any money on the truck until my new job started. Was at the shop yesterday and my buddy Jason designed the brackets for the T-case and have it temporarily tacked in place. Gotta check the driveshaft clearance for the front shaft. Its going to come close to the factory T-case but should be good. We were trying to find a stock Super Duty he had laying around to use for mock up but it couldn't be found. Next week the T-case Mount should be finalized and drive shafts ordered.