I just replaced my intake manifold gasket; (thanks for the great sticky on that) and now my truck is having trouble cranking. It sounds like it either doesn't have the power to spin the crank or like something is preventing it. Once it does fire, it run fine and smooth. I check the battery (12volts), cleaned the battery terminals, and the hot lead to the starter solenoid. Before i replaced the gasket the truck worked great. It doesn't sound like some of the fuel press regulator problems guys are having where it just cranks and cranks.... mine has trouble spinning... Did I miss a sensor? is my timing off?
Any thoughts? thanks for the help.
Any thoughts? thanks for the help.