Chevyboy95
OBS Enthusiast
thank you randall for telling me to test fit.... would have been bad if i didnt staple where i stapled. Driver side clears the Parking brake by about .25in and the passenger side will probably end up snug on the A/C/Heater thing below my dash. got a TON of sanding and bondo to do though to make my driver side kick presentable.
on to the pics....
initial resin and grinding on the driver side kick
backshot of the driver side kick after some grinding.
self explanatory
a test fit of the mid (LIKE A GLOVE!!)
little extra resin after grinding
look how clean the edge is on the door side of the kick...
started on the Passenger side kick... (stapled for clearance)
on to the pics....
initial resin and grinding on the driver side kick
You must be registered for see images
backshot of the driver side kick after some grinding.
You must be registered for see images
self explanatory
You must be registered for see images
You must be registered for see images
a test fit of the mid (LIKE A GLOVE!!)
You must be registered for see images
little extra resin after grinding
You must be registered for see images
look how clean the edge is on the door side of the kick...
You must be registered for see images
You must be registered for see images
started on the Passenger side kick... (stapled for clearance)
You must be registered for see images
You must be registered for see images