95 Ext Cab Chevy Build

[Chevyboy95]

thank you randall for telling me to test fit.... would have been bad if i didnt staple where i stapled. Driver side clears the Parking brake by about .25in and the passenger side will probably end up snug on the A/C/Heater thing below my dash. got a TON of sanding and bondo to do though to make my driver side kick presentable.

on to the pics....

initial resin and grinding on the driver side kick

You must be registered for see images

backshot of the driver side kick after some grinding.

You must be registered for see images

self explanatory

You must be registered for see images

You must be registered for see images

a test fit of the mid (LIKE A GLOVE!!)

You must be registered for see images

little extra resin after grinding

You must be registered for see images

look how clean the edge is on the door side of the kick...

You must be registered for see images

You must be registered for see images

started on the Passenger side kick... (stapled for clearance)

You must be registered for see images

You must be registered for see images

 

[Chevyboy95]

and here is a new pic of what my system will consist of after i get the new mids in the new kicks and console.

You must be registered for see images

 

[1998ECSB4x4]

how many pos runs and how many neg runs?
whats the new box tuned at?
best score to date (legal) at what hz?

 

[Chevyboy95]

how many pos runs and how many neg runs?
whats the new box tuned at?
best score to date (legal) at what hz?

6.5 cubic feet, tuned to 31hz

never metered it, but i know it could break a 50 in the mid 40s..

already rebuilding again, not changing much, but new amps, subs, mids.

 

[Chevyboy95]

New Battery Bank and battery box

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

 

[Chevyboy95]

little more done, had do drill new holes for some of the grommets. the 3/0 isnt grommet-ed because the jacket is SO thick and it wont fit trough the grommets. but my lower back is not liking me right now...

You must be registered for see images

You must be registered for see images

You must be registered for see images