93 NV4500 in a 2000?

[Lance Hohimer]

Can I use the 93 bellhousing along with the 93 slave and master for the clutch? What about pedals? I am planning on putting my 2000 C2500 body on a 93 k3500 frame, use my L31 and the 93 NV4500/tcase. But I have read the 95+ pedals are different the 88-94. Ok, so what about the master cylinder? Can it(93) be used with the 95+ pedals? If not how would I connect the 95+ master to an external slave? Or does that have to be changed too?

 

[Frank Enstein]

I would keep the 93 external slave setup. Cheap and easy to replace. Either switch out the pedals or modify the 2000 pedals to work with a stock 93 master cylinder. The master/slave assembly is available from LUK at Summit Racing. It comes pre bled! I had mine switched out in 1/2 an hour in the gravel driveway, in the snow! Also 8 years from now you don't need to remember what the cobbled up mess is when you need parts.

 

[Lance Hohimer]

Awesome. I have 93 pedals. This is all going into an automatic truck cab. Planning on swapping my 2000 c2500 cab onto a 93 k3500 frame.
Thank you