6 BOLT CONVERSION ON A C-1500

[COBRA-13]

Does anyone know if i could put the 6 bolt hubs off a 2-wheel drive 3/4 ton on my c-1500. basicly i just want to know if the hubs would go on the stock spindles.

 

[bluex]

What year is your truck an is it a regular cab or extended cab?

 

[///RAGMC]

Im doing the convention on my 91 for the front I got c2500 light duty rotors the rear Im thinking I am going to be ordering axles from Moser.

 

[phule]

If you have a 88-91 (iirc) ezt cab or anything 92-98 you can use light duty rotors of a 2500 they are six lug.

Adam

 

[COBRA-13]

Mine is a 1998 sierra sl ext cab. i just didnt know if the hubs would fit or if i had to change spindles. as for the rear im thinking of just dropping a rear axle from a z71 to do it in a budget.

 

[FastOrange]

Rotors off a 2500LD will fit right on, the "hub" is part of the spindle and rotor, bearings go in the rotor and the whole assembly fit on the spindle.

 

[COBRA-13]

Thanks to all, this makes it much more interesting to do.

 

[Ruger_556]

4wd axle is 3" wider... Stick with a 3/4 ton rear

 

[FastOrange]

4wd axle is 3" wider... Stick with a 3/4 ton rear

it will also be 14-bolt, which is a big plus.

 

[Ruger_556]

it will also be 14-bolt, which is a big plus.

And the G80 is halfway decent in a 14 bolt too...