454 tbi with 4l85E swap into c1500 350tbi

[Christian Steffen]

Meh. You're into your truck for way less than he is more than likely. I will say LBZ/6 speed Allison is high on the want list.

Haha that's for certain, they're nice reliable trucks though.

 

[Supercharged111]

Haha that's for certain, they're nice reliable trucks though.

If you can accept that injectors are a thing, yes they are. And also free of the DPF and all that crap.

 

[Christian Steffen]

If you can accept that injectors are a thing, yes they are. And also free of the DPF and all that crap.

Emissions deletes are musts IMO. Now were way off of the OP's intent for this thread. lol sorry OP

 

[Supercharged111]

Emissions deletes are musts IMO. Now were way off of the OP's intent for this thread. lol sorry OP

Yeah, about that. . .

You must be registered for see images attach

 

[Bloodwater79]

I pulled the ECU and wiring harness from the 1 ton and have it set aside. pulled the valve covers off the 454 to see it there was any sludge (looked very clean, the oil look pretty nice when I drained it. pulled the trans brake off the tail shaft, looks like I can get away with using a TH400 slip yoke and not have to change out the tail housing. Going junkyarding this week to see if I can find a 9.5 14 bolt, found 5 lug axles for it pretty penny but need the rest of the rearend if i'm going to make the swap.

Does anyone know where I can source the passenger side A/C bracket?
are the diesel brackets similar to the BBC? I might have a set from the 6.5 I had several years ago.

The 1 ton doesn't have A/C but the 1/2 ton does and wanted to keep it when I dropped the 454 in the c1500.