Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
You may have to trim the valance or bumper a little since you have 10" wide wheels. I fit 305/70R16 (about 33x12) on my truck at stock height with no rubbing at all though, it just depends on the truck
With the 15x10's you'll need to do some trimming on the back of front fender and bumper. I ran 33x12's on 15x8 with max crank and 2" block. I had to trim the lower shroud a little.
these measured out to 33.5 12.5 15's had to trim my bumper a lil and i was at full turn and drop off from a curb theyd bottom out. truck was stock height.
Im runnin 33x12.50x15 Toyo MTs on my 97 z71 with just a t-bar crank and a add-a-leaf in the rear. No rubbing at all. I did trim the bumper a little bit but thats just for when the wheels cranked and its flexin that it wont hit