Hey just wondering if somebody could point me towards what size? they list a 35mm and a 40mm I can’t take it apart to check it’s my only way to the parts store, it’s on a 1993 c3500 ext can 2wd 454 any help would be appreciated
2 size carrier bearings...which one
- Thread starter TonyO454
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
thegawd
I'm Done!
- Joined
- Feb 29, 2020
- Messages
- 2,265
- Reaction score
- 4,256
I buy or order brake parts by rpo code only.
for everything else if given 2 options but cant confirm until its torn apart I will buy both and return what I dont use. that's what my dad taught me growing up cuz we only had 1 vehicle.
Al
for everything else if given 2 options but cant confirm until its torn apart I will buy both and return what I dont use. that's what my dad taught me growing up cuz we only had 1 vehicle.
Al
FIRST thing is to identify the axle you have.
Wild Guess: 10.5" ring gear, full float. Same as my '97 K2500.
When it was me, I bought a pair of Timken Set76. I haven't installed them yet, though. Ran out of good weather, the posi will have to wait until spring.
https://www.summitracing.com/parts/tmk-set76
Wild Guess: 10.5" ring gear, full float. Same as my '97 K2500.
When it was me, I bought a pair of Timken Set76. I haven't installed them yet, though. Ran out of good weather, the posi will have to wait until spring.
https://www.summitracing.com/parts/tmk-set76
