My 388 cubic inch engine was at my parents place that used to be in my Firebird.
Specs of the engine were at the time of this photo was
350 010 block bored .060 over and zero decked
Hypereutectic pistons with two valve reliefs
Stock connecting rods resized with ARP rod bolts
Eagle cast steel crankshaft with 3.750" stroke
Lunati 60103 camshaft and lifter set
882 heads with screw in rocker studs, 1.6 roller rockers and heavy porting
Edelbrock Performer RPM intake manifold
Holley 750 Double Pumper carburetor
Loaded it into the truck with the old reliable skid steer!
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach