1989 4.3 Engine wire help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Fred_e81

Newbie
Joined
May 24, 2021
Messages
7
Reaction score
14
Location
El Paso TX
I recently bought an 89 shortbed. I was looking over the engine when I noticed a few connectors and wires either snipped or not connected. One connector is labeled PED 61. Not sure where that one goes but I was thinking possibly where I circled on the second pic.

The next one is a single gray in color connector. I am lost as to where this one hoes.

lastly, looks like a black and white striped wire that looks like it was just cut.

many help with this would be greatly appreciated.

thanks in advance for any and all help.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

PlayingWithTBI

2022 Truck of the Year
Supporting Member
Joined
Jan 3, 2019
Messages
9,728
Reaction score
15,171
Location
Tonopah, AZ
Here's some manuals where you can research your wires. Go to the wiring manual for your year truck.

The last picture looks like your tach reference wire coming off the coil. Someday if you get a tach you can use it. :waytogo:

 

legendman

Newbie
Joined
Aug 5, 2014
Messages
25
Reaction score
7
Location
Oakdale,CT
Is the EGR still there?
In the first pic that looks like the connector that goes to the EGR solenoid.

The cut black wire could be a ground, from what I have been able to find on a 93 there are 4 grounds in that area, 2 brown and 2 black.
 
Top