This TR-7 does a lot of different things depending on how you program it. Want to add a remote start to the factory keyless entry? This unit will do it.
Looking for a low voltage trigger? It will take anything that is around 5 volts and send out a 12 volt remote output
Will bypass the video on a CVA21005/1006/1003, ICA CV800
Latch and unlatch output from a pulsed input. Turn on headlights, neon, etc from an momentary output
Double pulse generator, use in alarm applications where the unlock wire needs 2 pules to unlock all doors
Closed loop circuit, protect trailers on hitches, foglights etc. triggers alarm when wire is cut
Pulse extender, upon a constant or pulsed trigger, the TR 7 will turn on the outputs. As soon as thhe trigger is dosconnected, turned off or at the end of a pulse, the timer will count up to the number of seconds recorded (PULSE TIMER) at which time the output wil turn off. Good for turning on headlights at night
HORN honk output module. On older aftermarket alarms, it may be difficult to disarm the alarm with RF remote when horn is honking. This will give you a 2 second delay betwen honks giving you time to disarm the alarm. Unique horn honking to distinguise your car from others. Perfect to add horn honking to any alarm.
Linear actuator controller, open and close amplifier racks from a momentary source like from an alarm negative output. Sequence is START, STOP, REVERSE, STOP
Doorlock pulse generator : Add ignition control doorlocks
Channel splitter! Split 1 channel from an alarm to 2 outputs! ADD EXTRA OUTPUTS!! Both outputs are programmable for pulsed, latched or timed output
Pulses to constant output. COUNTS a number of user programmable pulses within a programmed time. Good for triggering tracking decies.
3 timers in 1. Upon a constant trigger, all 3 outputs are user programmable to delay before turnon outputs or turning on instantly then delay before turning off outputs. Good for situations where you need more than 1 timer but on a different timer period without having multiple modules
Pulses to LATCH/UNLATCH- Momentary to latch and unlatch a circuit
Pulses to pulse output. Upon a number of pulses within a user programmed time, the OUTPUT will pulse (USE this with any remote start in our alarm department, use it with your FACTORY alarm or keyless entry, hit lock twice and it will REMOTE START your car or other). Programmable to see X amount of pulse before activation (IE: 3 pushes of the LOCK button on your factory transmitter before output is sent)
Pulses to timed output. PULSE TIMER
Latching outputs. 1st pulse will latch one wire. 2nd will unlatch first wire and latch 2nd wire, 3rd pulse will latch both wires. 4th turns off both wires. PERFECT for applications like foglights or other lights which have LOW and HIGH BEAM or for 2 stage accessories!
All this and many other things too like have passenger side window have auto down or up or both might need a couple of them to achieve that but for around $20 you can't beat it