Never miss a discussionGet a roundup of the newest threads delivered to your inbox. Enter your email below and pick how often you'd like to hear from us — no account required, and you can unsubscribe any time.Double opt-in — we'll email you to confirm. Unsubscribe any time.
My 98 Silverado. 5.7 Z71 4wheel auto . my harness melted on the egr pipe. I replaced the harness from a 98 Tahoe. I didnt notice that the Tahoe fuse block didnt have a brake light relay untill after I installed it. I have turn and flasher and park lights...no brake light but the cab brake light...
Howdy everyone! I've looked and looked and researched and researched some more for my problem, with no answers to come by.
What I'm dealing with is, my A/C Compressor clutch is never disengaged. I've checked the pressure on the low side with a gauge that comes with the bottles from O'Reilly...
Hello, new to the forum and new to working on OBS trucks. I recently purchased a 1989 c2500. I have been fixing it up and have been meaning to get around to working on the check engine light. I tried shorting the A and B terminals in the proper fashion to see what I could pull from the flashing...
Looking for diagrams and grounding points. I have no power to my yellow accessory wire to my radio and multiple electronics in my truck are not getting power. There seems to be a completely dead circuit. The yellow wire that is supposed to get a constant voltage to radio with key out of the...
96 Yukon sle 4dr. So I’ve been trying to chase this issue with the power windows and I keep going the wrong direction. When I first bought the truck, none of the power windows worked. I tested all the window motors by manually feeding power to them and they all worked flawlessly. Changed all the...
Got issues with my 96 Yukon’s audio system. I changed the headunit and there’s no sound coming out of all the speakers. I’ve tried connecting the pink wire to the remote wire (blue) on the head unit and still no sound. I read up about bypassing the factory amp and I did locate where mine sits...
Hi i am installing subs in my extended cab and need to find a good ground, i have a 93 extended cab, the fuse that is physically on the amp itself also blows as soon as it receives power, if anybody has any help or can point me in the right direction if i’m chasing the wrong problem all help is...
I just swapped my dash in my 94k1500 W/T edition. Only had driver side door switch and single dome light. Got a dash off of an earlier edition Chevy but has no cracks. It also came with interior foot lights, glove box light, and ash tray light. It supposedly plugs into the convenience center but...
Hi all,
I was adding some accessories to my 89 and decided to take power from the convenience centre. I went to the junkyard, stole a bunch of pigtails from different trim levels and got enough to fill every socket.
To make it easy on myself, I made this pinout map based on multiple sources...
Hello I’m working on my dads 1998 Sierra 5.0, I just replaced the longblock, and now it won’t start, doesn’t even crank. Followed gmc wiring diagram, and I’m not seeing 12v at the starter solenoid when the key is in the run position.
If I jump across switch side of the relay, the truck will...
Howdy! Getting close to having ac in my stock no ac 88 5.7.
Got a hvac box from a 94 with all connectors attached still, got a 94 control until, got new compressor, lines, evap core, condenser, actuators etc. all new everything. Have a dumb one piece 88 accessory bracket so I got the two piece...
Help. Anyone have a radio wiring schematic for the 98 1500. Can’t find the wires for the radio in the Haynes manual and the wires are faded to where it’s hard to tell which is which color.
I’m new to this forum as of yesterday.
I purchased the Intellitronix DP6007 digital dash and I cannot find an image or text on what the wiring colors/labels are for the pinout that’s behind the instrument cluster for the install.
The instructions are HORRIBLE and the customer service is a...
I bought the power window and locks for a 88-94 but have no idea what the pins are for and which control what. If you could help me out that’d be appreciated.
Hey everybody, so I have an intricate job to do.
I've been trying to fix my truck's starting-idling-dying issue after I dropped a new engine in it.
A buddy of mine suggested replacing the fuel pressure regulator. So I let him do it. Little did I know there was gas on the intake. Then he...