1996

  1. J

    1996 4L80E P0713 Transmission fluid temp sensor problems

    I have a 1996 Chevy K3500 with the 5.7L and 4L80E I have a P0713 Code. Last weekend I dropped the pan and installed a new internal wiring harness and TFT sensor. I put it all back together and that did not solve my problem. The transmission does not shift at the correct times, but when I clear...
  2. DixieMafia251

    Dorman 30amp universal ignition switch

    What’s up Family?! It’s been a while since I posted last.So after my long ordeal chasing “Electrical gremlins” it turned out to be a bad ignition switch.Instead of buyin a new/used stock ignition switch,I decided to go with the Dorman 30amp universal ignition.It recommends using a fusible link...
  3. J

    P0300 and P0302 With new long block 1996 K3500 5.7l

    I have been having a lot of problems with my 1996 K3500 5.7l The truck has about 220K miles on it. I recently had problems with it running very rough. I found out I had low compression on two cylinders, So I decided to get a new Long Block. I replaced a lot of other parts with it. -Blackbear...
  4. L

    96 4.3 throwing codes after cap and rotor replacement

    my 96 4.3 is giving me codes p0102 p1345 p0700 after changing cap a rotor and air filter. The truck will start up and run fine.
  5. Geauga Lake John

    Geauga Lake Park Truck Refresh

    This truck was originally purchased by SeaWorld Ohio then transferred in 2001 to Six Flags Worlds of Adventure, which operated on the opposite side of a lake from SeaWorld. It was equipped with tool boxes, a ladder rack, and air compressor which serviced machines and rides at what was then the...
  6. Jesse_Wenting

    Questions about 94 K1500 build

    I'm soon to be replacing my 96 K1500 with a 94 K1500 that's in much better shape, but I want to keep as much of the functionality and familiarity of my 96 as possible so I had planned on transferring the entire interior to the 94 once I have it. This is mostly because I prefer the look of the...
Top