Search results

  1. B

    The Member Truck Thread

    Here is my baby & money maker. I did lots of mods this year. cab lights, fender flares, Composite grill, kodiak handles, 94+ style mirrors. I had NBS LED tow mirrors, took them off with in 3 days, and sold them. The mirrors were nice, but stick out too much for normal city driving. Up next: 4"...
  2. B

    Post your lifted 2wd's!

    Well she's not lifted yet but I'll be placing an order some time this month for a 4" spindle lift kit!! I received the comer lights 3 days ago from a good fellow member "GreaseDog", $20 shipped. Here is the soon to be before picture.
  3. B

    Gas mileage!!!!

    I get 11mpg on my 93 v6 reg cab. There must be something really wrong with mine then.
  4. B

    94+ Chevy 3500HD clip on 1500

    I was thinking maybe a 2'' or 3'' BL might do the trick. I still want to see some pics though.
  5. B

    94+ Chevy 3500HD clip on 1500

    Hi guys, does anyone know of thread or or site that describes the steps for a 94+ Chevy 3500hd front clip conversion for a non hd truck? I love the beefy look of HD trucks, just sexy IMO. I've been searching for months on Google for at least a picture of this conversion, but nothing. I went to...
  6. B

    Debadging vs. badges - pics

    Ok, but you still have nothing to worry about since: 1) You have an ext cab, I dont think there are any ext cab w/ts. 2) You have a GMC composite grill which further helps it to distinguish from a W/T. 3) You have a 2 tone truck. Nothing to worry about. Besides if you do debadge it, and don't...
  7. B

    Debadging vs. badges - pics

    Well you don't have to be afraid of your truck looking like a w/t because you have a 2-tone truck. Even if it wasn't, what is wrong with a clean looking w/t body?? I don't get it.
  8. B

    Cab Light Install

    Delete**
  9. B

    Cab Light Install

    Well I know its a little late but here are some pics took them today.
  10. B

    Misc. Interior Parts and Pieces

    Well Im interested in the handles, but not sure if they will fit on a 93. Probably with a few mods. Are those the handles that are on the door pillar and used to climb in?
  11. B

    Scanning ECM Too Often

    okkkk I guess its a stupid question or a question already asked. Thx alot
  12. B

    Scanning ECM Too Often

    Hey guys, can you damage the ECM by scanning for OBD1 codes too often? I've recently began checking for codes about 2 months ago after the check engine light came on for the first time. Since that day, I've gotten 4 different codes and various problems. I have fixed the issues and scan for...
  13. B

    tips on demolding,,,

    I removed a plastic decal from the original dealership "Hawthorn Chevrolet" using hot water, a sponge, a plastic scraper, and a lil bit of finger nails lol. Works really well to for stickers; I removed the "W/T" emblem using this method.
  14. B

    Yay or nay? need opinions

    I say go for it. Looks alot cleaner and sleeker. IMO. Id Photoshop a few other pis in different angles first since the part of the grill you are trying to black out isnt a perfect line. It is curved. It might look good in that angle but crappy in another.
  15. B

    parting out 92 K2500 light duty (6 lug)

    Sounds good. PM sent
  16. B

    parting out 92 K2500 light duty (6 lug)

    Sounds good ill PM
  17. B

    parting out 92 K2500 light duty (6 lug)

    How much for the 94+ corner lights with shipping??
  18. B

    parting out 92 K2500 light duty (6 lug)

    Im looking for the 4 oem corner amber markers for a 94+ chevy composite grill and driver front turning signal. Its difficult buys parts like these up here in NJ. Yards are stubborn selling small parts. If they are available hit me up.
  19. B

    3/4 Ton Lift Springs

    Rock hard stiff. I wouldn't recommend going for a 7+ leaf pack for daily driving and cruising. The reason I went for 7 pack leafs is because I haul up to 3 tons of scrap metal on a daily basis. I tow the occasional clunker from time to time. But the most important thing is that they hold up...
  20. B

    3/4 Ton Lift Springs

    Well if you've never changed your original leafs you'll need to heat up the bolts. Took me awhile. I put 1 ton leafs on mine, its a 7 leaf pack. Gave my roughly 2.5-3 of lift? Not sure because I never measured. They were really stiff initially, but a year later after daily heavy loads they have...
  21. B

    Kodiak/Topkick Exterior Door Handles

    The handles have a tab on the back side that you would push downward. Then you would pull the door. The handles are stationary. I always thought they would lift outward like some GMC box trucks I've seen, but that is not the case. Not sure if that helps, I cant describe it any better.
  22. B

    Kodiak/Topkick Exterior Door Handles

    I just finished installing these on my truck. man these are great!! Took me awhile though because I stripped the screw hole by over tightening!! That's when I realized that the handles are cast aluminum!! Guys be careful the screw holes are very delicate! i Think they are delicate because they...
  23. B

    Chevy Emblem On GMC Grill

    Looks great, but you have to figure out a way to remove the GMC plate. Looks good man.
  24. B

    Rods for Kodiak/Topkick Door Handles

    Thx for the pics. I went back to place and luckily they still had the doors with the rods. When I took them out, I unhooked the handles from the rods, thought it was a direct fit with my Chevy's rods. again thx. Sorry for the double post.
  25. B

    Rods for Kodiak/Topkick Door Handles

    Thx for the pics. I went back to place and luckily they still had the doors with the rods. When I took them out, I unhooked the handles from the rods, thought it was a direct fit with my Chevy's rods. again thx

Latest posts

Members online

... and 5 more.
Total: 1,993 (members: 55, guests: 1,938)

Forum statistics

Threads
64,689
Messages
1,398,842
Members
52,245
Latest member
wizrdspike

Share this page

Top