Search results

  1. B

    700r to th350 back to 700r

    Ok thanks for the info. I put a bottle of Lucas in it and and after about 50 miles its started going into OD. It still hasn't went into passing gear I don't think. I can be running about 60the in OD and give it a lil gas and it will down shift into 3rd. But I can floor it and it won't go down to...
  2. B

    700r to th350 back to 700r

    I recently put a long tail th350 in my truck had problems with it and the tranny guy said he would build me a 700r4 that i would be happy with. Well i now have problems with the 700r4. I have no OD or passing gear! I thought it was in the tv cable so i adjusted it 3 or 4 times once i had it to...
  3. B

    Th350 problem

    Yea I hope so also. There was a bushing in the back pf the crank that I took out. The guy helping me with the swap said that it is for manual transmition and if I left it in there it would put pressure on my pump and mess it up. Also someone also asked me if I filled up the TC before I put it in...
  4. B

    Th350 problem

    Ok firefighter first off I'm a Wildland firefighter in SE GA. Good to always here from a brother. I didn't build the trans myself I had a guy build it and he put 3yr warranty on it but he's about 2hr away. But when cold in park engine idling trans overfull. When at normal opp temp in park engine...
  5. B

    Th350 problem

    Ok yall I swapped from 700r4the to long tail th350. Before install I had the th350 rebuilt with Alto reds and sift kit. I purchased a new torque converter. Installed everything. While I had it on the lift I put the truck in gear and it didn't go. So I rev the motor and it went in gear and...
  6. B

    Seems like i cant win!

    Ok I swapped to Carb from tbi. I went with crane cam #intake 100172, performer intake and was running a eddy 600 Carb. Drove for a week... shaped from the eddy to a Holley 600with vacuum secondary. Started up the truck advanced the timing just a hair. Set idle drove down the road to test TB...
  7. B

    need some help.

    Ok guys everything has been hooked up. I gotta get a return style regulator. I taped into the fuel pump power wire and hooked up a toggle switch that's my anti theft device lol! Also If I just switch on the truck to listen to the radio I won't flood it it will just purge the fuel system. Images...
  8. B

    need some help.

    89-71 that movies was bad ass! And thank you for the info. And L.E.D do you have a thread on all the led lighting for our trucks? Also yall may be able to help with this...... I plan on running aftermarket gauges, I wanna do diamond plate aluminum cut to fit the factory location and keep the...
  9. B

    need some help.

    What all has to be hooked up when you swap from tbi to carb. ive swaped and my fuel pump is only pumping a few min and stops. I went with crane 3/4 race cam #100172. i got long tubes im just waiting on collectors to finish that up. and now im just trying to figure out all the little stuff. As of...
  10. B

    Holly pro jection intake

    My truck is a 90, 5.7 tbi bone stock! I plan on doing the ultimate tbi mods while shaping to the new intake. Future plans are 2500to stall if needed, definitely gonna build the 700r, Regear to 3.73 or 3.42. I'm running 3.08 now. I have a set of long tubed I plan to run a h-pipe into magnaflows...
  11. B

    Holly pro jection intake

    Has any one ran this intake? I also have 2 cams Idk what one to use. A jegs cam #200006 the other is a crane # 100172 what do yall think? I'm gonna start on it tom.
  12. B

    Factory bottom and mild top!

    Ok GMstrong made some good points on my post about the 400. So what do yall think about this.... I have the factory 5.7 bottom nothing major wrong with my motor so why not slap a cam intake Carb and headers on it. I know vortec heads are better but that's only after about 5500 from what I've...
  13. B

    SB 400

    Poor design? I was told by a engine builder around here that a mild 400 can make more torque and power than a strong built 350. Is this true? Also the same guy with the 400 has a rolling assembly 350 bored 40 over. He said everything is new and the block just needs to be bored. No cam no heads...
  14. B

    SB 400

    Ok the lt1 swap might be put a way. I found a good deal on a 400. If its an original motor what heads and casting number do I need to look for. Also what casting numbers will be on the block. I'm thinking they may be double humps. He's throwing in a 480 lift jegs cam intake and lifters for...
  15. B

    photoshop please!

    I dont have a pic of the rims here in town. could you use just any pic of some cragar ss wheels? this is the pic straight off the cragar site.
  16. B

    photoshop please!

    I found a heck of a deal on some 15x10 cragar ss wheels! Only prob ive never seen a GMT-400 truck with them ive seen them on older truck but not ours. so can someome help me?
  17. B

    Lt1 swap

    Thanks yall I sent him a pm. My 90 shouldn't be near as difficult cause I don't have all the wiring like the 96-98 trucks. And wagonbacker brother if you can talk the state of georgia into paying me more ill buy it I'd love to go ls. But I can get a wiring harness Ecu and complete lt1 with...
  18. B

    Lt1 swap

    Ok I'm new to the forum. I just traded my 85 c10 tubbed and slammed truck for my new love a stepside 90 with tbi 5.7, first off this is gonna be my next project truck it will be a street sleeper with maybe the trip to the track every now and again. I've tried searching and couldn't find anything...

Latest posts

Members online

... and 17 more.
Total: 1,972 (members: 67, guests: 1,905)

Forum statistics

Threads
64,673
Messages
1,398,525
Members
52,210
Latest member
toylman

Share this page

Top