Search results

  1. MNorton

    What is this!

    Smooth not rosette!
  2. MNorton

    What is this!

    The 10th digit is an R! it looking at the picture of the firewall plate, it plain as day say 92 if that is supposed to be the year!
  3. MNorton

    What is this!

    Should the number 031537 on this plate be the sequential number in the V.I.N.?
  4. MNorton

    What is this!

    Thanks so much guys, always get the answers here! Interesting that the year says 92, the title says 94 ! Lol
  5. MNorton

    What is this!

    anyone have an idea of what this plate on my firewall is?
  6. MNorton

    Bed bolt size

    Sorry if I didn’t provide enough information! As I said some of the bolts in the bed of my truck were missing. it is a1994 GMC C1500 Stepside 5.7! Here is an actual picture of my bed where you can see missing bolts/screws with torx head. Not the typical bed mounting bolts found everywhere when...
  7. MNorton

    Bed bolt size

    I figured it out, they are M8 1x25 and of all places I found them at Menards!
  8. MNorton

    Bed bolt size

    The truck I purchased is missing a few of the bolts/screws shown in the picture In the bed. Does anyone know the size and where they might be available? I have looked everywhere. Doesn’t look like LMC or NPD has them!
  9. MNorton

    Headlight cover clips

    I purchased new clear headlight covers due to the ones I have being all scratched up. It looks like there are small metal clips holding the cover on and apparently there are spots for four of the clips on each headlight. I haven’t taken them out yet to replace yet but wondered where I could find...
  10. MNorton

    Rally Wheel Worth?

    Thanks for all the opinions!
  11. MNorton

    Rally Wheel Worth?

    What do you think these wheels should be worth? I found them at a yard sale, they have new chrome and center caps. The were sandblasted and repainted silver. 15x8 inch. I haven’t purchased yet but the fellow was asking $400 but said he would bargain a bit!
  12. MNorton

    How should I repair this!

    Thanks to everyone!
  13. MNorton

    How should I repair this!

    I have a 1994 GMC stepside I have been working on and I would like to repair this back section on both sides but not sure what to do. I believe Bondo, painted with a rattle can would look better than the way it does now. Any ideas? I gues it needs to be the flexible stuff? The first picture is...
  14. MNorton

    Strange Noise Where There Shouldn't Be One

    So glad to find this post! My 94 sierra speed sensor was leaking around the o ring so I got a Dorman replacement and it made a whining noise as described above. I also then ordered a ACDelco sensor but upon inspection I found the same issue the magnetic bars were protruding out past the housing...
  15. MNorton

    Steering shaft upgrade

    I ordered one of the 40 dollar ones off eBay and much to my surprise I did not have to torch the shaft to break loose the plastic thingys. The shaft I got was new and was for 84-94 jeep Cherokee. The shaft would move in and out 2 1/2 inches. My shaft was about 19 inches bolt center to bolt...
  16. MNorton

    Coolant temperature flucuates

    Just an update, I replaced the thermostat three times and burped the air out each time. It stil kept fluctuating. I put a vacuum tester on the cooling system system and it would not hold a vacuum. I finally found it was dripping water out the lower weep hole on the water pump. After replacing...
  17. MNorton

    Cruise control cable

    Thanks so much! I took the cable off the carb as you said and was able to pull the cable out and attach it to the control module! Now I just need to test it! Thanks! You can always learn something on this site!
  18. MNorton

    Cruise control cable

    I have a 1994 GMC C1500 Pickup. Trying to get the cruise control functioning. The cable is connected to the carburetor ( it was swapped before I purchased) but on the control module end there is nothing on the cable end. The module appears to have a flexible tape with a loop in it the I assume...
  19. MNorton

    Coolant temperature flucuates

    I finally took a picture. Here you can see the intake is plugged along with the water pump. Dine my engine is now a 99 suburban 350 I guess it had vortex heads. Should it be set up this way?
  20. MNorton

    1994 Sierra Radio won’t power on

    Thanks for the information. I replaced the CDM with a reconditioned unit and have the same issue , nothing powers up! I checked and have switched 12 volts and constant 12 for memory just like the schematic says. I guess I’ll look for a display unit now, I just wanted to keep stock radio.
  21. MNorton

    Coolant temperature flucuates

    I’m not sure about the heads but I checked and the port on the intake is plugged as is the one on the water pump!
  22. MNorton

    Coolant temperature flucuates

    I purchased a 1994 GMC Sierra C1500. The engine has been replace with a rebuilt 350 from a 1999 suburban. Also the throttle body injection has been replaced with an Edelbrock carburetor. I am in the process of trying to get all of the cluster gauges to work. When I hooked up the temperature...
  23. MNorton

    My 1994

  24. MNorton

    1994 Sierra Radio won’t power on

    I recently purchased a 1994 GMC Sierra C1500 Stepside. Really liking the truck and working on it. my question is about the radio. I have the three part system that includes the casette equalizer. I think possibly the CDM may be bad. Will a defective CDM like bad capacitors keep the system from...

Latest posts

Staff online

Members online

Total: 1,655 (members: 49, guests: 1,606)

Forum statistics

Threads
64,393
Messages
1,393,015
Members
51,565
Latest member
ToastiestPaper0

Share this page

Top