Search results

  1. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    They were just options on the dash Command pid menu so i added them to my live data block. I thought you would know what they mean or represent
  2. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    Fuel trims highway speed
  3. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    My fuel gauge reads well, it vibrates quite a bit but its pretty acurate. I had read a thread about adding rc car oil to where the gauge needle sits to fix the erratic needle but I need to fix other issue that are more importante first Here are my fuel trims My truck had warmed up and I had...
  4. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    I believe it was your setup that i saw. You had it stored for 27 years or so you said
  5. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    Will take a look at them next time I drive. If i remember correctly, they are always negative numbers. Anything fuel related won’t ship to CA. Fuel pumps being one of these items
  6. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    I took my burb to a mechanic, I explained to him what was happening and when it was happening. He asked what all I had done and went through the list. He asked about fuel pressure, gave him the numbers. Compression, gave him the numbers. He suggested my fuel pressure is low that's why truck...
  7. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    Just the egr valve. I'll have to youtube the others, I've never seen anyone clean those I have ran some lucas fuel injector maybe 1 month ago for a full tank and no change. Will fill up with 91 next time(Monday) I know there is a Top Tier Fuel station close to my house.. gotta look it up. Saw...
  8. alvaroemg

    Shocks on a Budget

    I put monroe on the rear of my honda pilot and the old shocks were better, maybe mine were defective, they do have good reviews on amazon
  9. alvaroemg

    Shocks on a Budget

    i purchased kyb gas a just from rock auto. Very happy with them. After rebates, they came out to be about 25 each
  10. alvaroemg

    Running cool after replacing temp sensor

    Mine reads 160*. Once I changed the sensor(between SP 1 and 3), gauge needle jumped up to 195, and back down to 160. I had never seen it go to 195, so I believe its a defective motor in the gauge. if you have a scanner, verify temp and don't worry about the gauge
  11. alvaroemg

    Reversion Raceworks 1999 C2500 Suburban "REVurban" Build Thread

    I too want to know!!!
  12. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    UPDATE On a previous post a page back or 2 or maybe even 3, i had mentioned that I had driven to work with the 2 new spark plugs gapped at .045 and that the truck was misfiring, so before heading home i gapped both to .060 and the truck rode better. Just for the heck of it, i checked another...
  13. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    i checked the gap on the double platinum plug previously installed on cyl 4 and it was at 56. I gapped it to 60 and threw it back in cyl 4. Runs smoother, no cel yet, drove around the block and did some hard accelerations and no cel. Just seconds prior to pulling into drive way cyl 2 starts...
  14. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    Whats the process of testing the injector? Prior to intake installation, i tested for leaks with injector spider installed and I didn’t see any fuel leaking outside of its housing.
  15. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    Egr cleaned.
  16. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    Cleaning egr atm, upon taking it out, i remembered i did clean it when I did the heads
  17. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    Porcelain is good on said SPs. Just checked.
  18. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    Valves were installed with new seals by the shop that got me the new heads. They have under 1000 miles or close to it. Injectors are brand new, fj504 standard, as of 2 weeks ago. Maf sensor is clean. My old started giving me low input code, purchased one on amazon and it died after 4 months...
  19. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    Here are the photos. cyl 2 looks great, as well as cyl 3. Cyl 4 was a brand new plug(previous fouled plug was installed in cyl 6) 2, 3, 4
  20. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    My truck don’t consume My truck doesn't burn oil and if it does its barely anything noticeable. It's got a leak at the timing cover and oil pan seal(I didn't know how much gasket maker to add. I tried to patch it from the outside but the leak is still there.) Timing chain is new together with...
  21. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    On a side note, i took my kids to the movies this weekend and came across these
  22. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    Our job site got flooded by the rain in Salinas, CA so we are off that job I believe for an extra week. ATM, I'm commuting to work every day, 120 miles/ day. The truck misfired less on the double platinum plugs gapped at 0.60 as per my picture on post #63, I actually forgot to upload the...
  23. alvaroemg

    Chasing down cyl. 2 misfire (P0302)

    New plugs installed gapped at .045. Truck misfires while cold on a few cylinders on idel 1,2,3. Once warm, misfire secedes a bit and becomes more stable on idle, but still has misses
  24. alvaroemg

    Got my mooneis working!

    Do you have pictures?
  25. alvaroemg

    Grounding question!

Latest posts

Staff online

Members online

... and 10 more.
Total: 2,587 (members: 60, guests: 2,527)

Forum statistics

Threads
64,553
Messages
1,396,427
Members
51,982
Latest member
old dodge guy

Share this page

Top