Search results

  1. 7

    RockAuto WAI Alternator?

    Ok here's a couple questions. 1994 K2500 5.7 L 1) I have a single brown wire does this need a resistor added or just run it to the new alt as is? 2) The brown wire goes to the L terminal on the new alt. Is this correct? 3) Sense wire. Should this be hooked up? 4) If using the sense wire...
  2. 7

    RockAuto WAI Alternator?

    Yes, that is correct and what I meant to say. But thanks for the correction. I'm stumped why there is no threads on this forum concerning how to wire the ad244 on a TBI lot of vague statements and conflicting information. When I started a thread asking, I got zero replies and turned to other...
  3. 7

    RockAuto WAI Alternator?

    I found the CS130 by looking at a 1996 k2500 the AD244 was under a 2003 GMC Envoy with the V8
  4. 7

    RockAuto WAI Alternator?

    The WAI alternator is the same as the NAPA HO alternators when looking at the specs on NAPA it says manufactured by WAI and NAPA offers a lifetime warranty on them but charges like double compared to Rock Auto. Rock Auto also has a WAI High output CS130 a little better than the 130D, and a...
  5. 7

    TBI AD244 Alternator swap confirmation.

    Alright, Thanks.
  6. 7

    Double Din & custom console?

    Some double dins have anti-glare screens, The one I'm using is a pioneer avh-p4200dvd it's a older unit but works great for my needs. I tried a newer pioneer and the screen glare was so bad I couldn't see the screen during the day. I build a custom center console with two 10" subs downfiring...
  7. 7

    TBI AD244 Alternator swap confirmation.

    Bump
  8. 7

    Misfire, runs like poop

    How old is the distributor? you mentioned this is the second one?
  9. 7

    TBI AD244 Alternator swap confirmation.

    I have a 1994 ecsb with the 5.7 TBI and CS130 Alternator I'm looking to swap over to a add244 but during my research I see conflicting information. Some say plug the factory brown wire to the New alts L terminal and you're done some say brown wire + sense sense wire hooked to the output stud on...
  10. 7

    Truck stalled, wouldn't restart, then started fine hours later

    My 1994 had a problem where on a cold start it would fire right up and run perfect but once you reached your destination it would not start again unless I let it sit 12 plus hours, Then it would do the same thing. When this happened and it would not start it cut fuel and spark also.. I first...
  11. 7

    Misfire, runs like poop

    I put in a duralast gold last year and The ICM was bad out of the box, I swapped out the ICM for another one I had on hand and the trucks has been running great since. How old is your genuine GM ICM?
  12. 7

    Sub box for 94 single cab

    Do you already own the 8's? If so what are the model numbers? after this is answered we can move on to the next question..
  13. 7

    1993 K1500 Double Din/ In FACTORY HOLE INSTALLED!!

    Geez bunch of fucking cry babies.. lol Bottom line is it looks like ****..
  14. 7

    1993 K1500 Double Din/ In FACTORY HOLE INSTALLED!!

    That's a pretty sweet set up there ^^
  15. 7

    1993 K1500 Double Din/ In FACTORY HOLE INSTALLED!!

    Yup this was about 15 years ago when I had one in my Monte carlo and the head unit was old back then, just a cd player with am/fm radio
  16. 7

    Replacing Cat back with Dynomax and broke the 2 cat bolts

    I put the same setup on mine a month ago, I let the bolts soak in pb blaster a coupe days prior and they came off fine.. Mine did not have a gasket or donut on the stock setup and the replacement exhaust didn't come with it either. when you bolt it together it will seal assuming the rest of...
  17. 7

    1993 K1500 Double Din/ In FACTORY HOLE INSTALLED!!

    I got the double din for 75.00 used it looks like new though lol.. Pioneer used to make a 1.5 din, I had one in my 1978 Monte Carlo.
  18. 7

    1993 K1500 Double Din/ In FACTORY HOLE INSTALLED!!

    I'll admit, it's not the most precise fit.. But it mounted very sturdy, My double din is very secure, and I still have my ice cold AC vents, I also Installed a set of components in the doors.
  19. 7

    Ext. Cab Sub Box Behind the rear seat?

    You must have some big ass friends lol.. I fit comfortable (enough) back there and I'm 6' 1" weigh about 240 lbs The main reason I got to keep it though is so the family will fit.. I have a 7 yr old that rides back there when we go mess around, camp, get firewood etc.. I'll have to go under...
  20. 7

    1993 K1500 Double Din/ In FACTORY HOLE INSTALLED!!

    Here's mine..
  21. 7

    1994 K2500 No start after driving and up to temp.

    UPDATE.. Said screw it and Grabbed the Duralast Gold Dizzy, Threw it in this morning and she's running like a top.. After I buttoned everything up I took it for a cruise brought it home and shut her down waited a half hour and she fired up instantly.. I'm still gonna keep the stock unit and...
  22. 7

    Ext. Cab Sub Box Behind the rear seat?

    To bad it wasn't a split rear bench, I'd consider getting rid of half lol..
  23. 7

    1993 K1500 Double Din/ In FACTORY HOLE INSTALLED!!

    Well you are the one that wanted pics you tell me?
  24. 7

    1993 K1500 Double Din/ In FACTORY HOLE INSTALLED!!

    If your talking to me I got bigger balls than you and the OP combined... Anyhow I just joined the forum 2 days ago, Let me figure out how to post pics and I'd be more than happy to post some up..
  25. 7

    Ext. Cab Sub Box Behind the rear seat?

    Yeah i figured as much.. I've seen the pre-fab boxes for under the seat but I think I'd rather build my own. I got a JL 10TW3 shallow sub that only requires .50 sealed so shouldn't be to hard to squeeze under there.

Latest posts

Staff online

Members online

... and 18 more.
Total: 1,773 (members: 68, guests: 1,705)

Forum statistics

Threads
64,345
Messages
1,391,858
Members
51,468
Latest member
kenjad96

Share this page

Top