Search results

  1. RoyBob

    Headers for 1989 swb silverado 350 2wd

    But you didnot list the Part number ???? I bought from summit Headman Longtube Only the Drivers side would work The Pass would not go i removed the starter and the Trans dust shield still will not go My part number Hedman Street Headers 69440
  2. RoyBob

    Headers for 1989 swb silverado 350 2wd

    OK what a freekin Nightmare 1989 silverado swb 2wd 350 What freekin headers will work Headmans will not work they hit the upper control arm mounting on the Pass Side Long tube Part Number Hedman Street Headers 69440 they work on drivers side.. I will be running Edelbrock Performer RPM...
  3. RoyBob

    A few questions

    Made a Big Summit Order $$$$ Ouch Just need more info on what wires to connect for the new HEI / Fuel pump circuit / and any other wires. or tips I could use Has any one used the Flow master with 2 inlets and 2 outlets for the duel Exhaust seams like that would save some room Thanks Old...
  4. RoyBob

    A few questions

    Thanks in advance Old guy here And have a few questions Thanks So i have decided to remove my 4/6 drop Its just not for me Going to stick with 2 inch in front and back 2 inches Just a not i will have the kit parts up for sale when iam done Its Belltech parts So I have decided to Go with...
  5. RoyBob

    Sorry if this is posted but could not find

    What I would like to find out is what Long tube headers will fit the 350 Clearance no issues 1989 swb 2 wd Not real concerned about price want good fit and Quality ..
  6. RoyBob

    Sorry if this is posted but could not find

    Correct I have installed many thumper cams and they will absolutely Make Power
  7. RoyBob

    Fuel tank Relocating

    My truck has a 4/6 c notch will headers and duel exhaust still work
  8. RoyBob

    Fuel tank Relocating

    OK This is my thoughts < what i want to do is have room for long tube Headers, and true duel Exhaust Thats my goal for under the truck any ideas ? I would very much not need to relocate the tank .. I have 350 TBi Not for long on the tbi,,,and a built 700R4 Thats in the truck now and its a SWB...
  9. RoyBob

    Fuel tank Relocating

    I think i have seen that also I will have the bed off so a little fab work will be easy
  10. RoyBob

    Fuel tank Relocating

    Hello All so I would like to remove the side Fuel tank and Install a smaller Fuel tank where the spare tire is . Not sure where to buy a tank I have seen a few and they hang way down. Not looking for a tank that holds 20 gal it can be way less my truck is a 1989 swb Silverado 4/6 drop...
  11. RoyBob

    Sorry if this is posted but could not find

    I will Need to dissagree That bthe thumper cams are not good I have done Several 350s with this Cam 12-600-4 with intake 670 Holley Street avenger carb a set of world heads 2600 Stall 700R4 trans And spanked several BBC Trucks
  12. RoyBob

    Exhast ideas for SCLB

    So what headers will be best for the 1989 SWB 350 4/6 drop ?? want a good set needs to clear Oil filter and auto trans Linkage Part Numbers please and Make Thanks
  13. RoyBob

    Sorry if this is posted but could not find

    Think i may just do Headers and Exhaust
  14. RoyBob

    Sorry if this is posted but could not find

    Thank You It even has zero rust or wrecks
  15. RoyBob

    Sorry if this is posted but could not find

    Old school Carb guy here, Not use to the TBI stuff So My 1989 350 Is stock I have done timing chain /gears/ and intake gaskets I know the engine has the drilled holes for the Roller Lifters spider/Hold down. I would like to install a nice Cam Rough Idle Like the Muthathumper Cam I have...
  16. RoyBob

    My 1989 Bought new

    4/6 drop Belltech C notch 20Inch american Racing 9 front 10 rear Youkon Locker one repaint 350/700R4 Power everything might even sale would be hard to do not much over 200K Miles
  17. RoyBob

    My 1989 Bought new

Top