Search results

  1. Brice Edwards

    454 swap

    Alright cool. Thats what's I needed to know. thanks
  2. Brice Edwards

    454 swap

    I have the harness and computer. So what your saying is that the 97 harness won't plug into the 98 truck without modification
  3. Brice Edwards

    454 swap

    hey everyone. I got a 98 k3500 cclb with a 350 and I'm looking to put a 454 into it. The 454 is out of a 97 k2500. What I need to know is will the harness and computer plug in to the 98 without issue? looking to do the swap as cheaply as possible.
  4. Brice Edwards

    Turn Signal Wiring issue

    Normally does it whenever I turn the key on but I just tried it again and it didn't happen
  5. Brice Edwards

    Turn Signal Wiring issue

    It also drops voltage considerably when the parking lights are turned on
  6. Brice Edwards

    Turn Signal Wiring issue

    All other lights work and light up fine. Just the Driver side blinker stays lit and always blows the fuse. I believe the last time I checked it out the light on the dash stayed on even with the lights unplugged
  7. Brice Edwards

    Turn Signal Wiring issue

    1998 K3500 I've had a problem with my turn signals the past year and I'd like to finally solve it. On the cluster when the parking lights or headlights are on the left blinker stays lit on the dash It continuously will blow the signal fuse and the signals do not work at all or the hazards. It...
  8. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    I sure did, didn't change anything
  9. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    no, they're only like that at idle
  10. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    I take that back now it runs even worse and has no power, it almost acts like the timing is way off
  11. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    I unplugged them both, still no code thrown but it runs slightly better. still definitely rich though
  12. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    Would it possibly make it run better with them unplugged?
  13. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    yep, positive 25 at idle. is it possible that my o2 sensors are bad?
  14. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    Yes I replaced the FPR
  15. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    yep, 3 times
  16. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    I got 52 at prime and 49 at idle
  17. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    What's a good fuel pressure for it to be?
  18. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    25, the long term trims were at 50
  19. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    Looks like its all the way on the rich side at idle then goes down once I hit the gas
  20. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    My code reader does get live data and datalog. what should I be looking for on it?
  21. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    I believe my obd2 reader can datalog. I'll see what it says on my lunch break
  22. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    To the point where it sounds like it has a cam at idle and if its idling any lower then 1k and I give it gas, it bogs down and almost dies
  23. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    New injectors and a healthy application of gasket sealer seemed to do the trick. Now it's just running real rich. Thanks for the help guys
  24. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    I went ahead and ordered the correct injectors. should be here Thursday.
  25. Brice Edwards

    Vortec 454 Revs up high then dies HELP!!

    Well what injectors would you guys most recommed? I actually tried putting the stock injectors back in and now seem to be too short. links would be appreciated

Latest posts

Members online

... and 7 more.
Total: 1,428 (members: 57, guests: 1,371)

Forum statistics

Threads
64,383
Messages
1,392,671
Members
51,530
Latest member
anglebeef

Share this page

Top