I was doing some maintenance and found this connector not sure if it's auxiliary or if even need it. Figured it wouldn't be a bad idea to post
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I'll have to checkHow about the Knock Sensor down near the starter?
If you look close at the pigtail, where it disappears into the harness convoluted tubing, that connector would not reach there.How about the Knock Sensor down near the starter?
If you look close at the pigtail, where it disappears into the harness convoluted tubing, that connector would not reach there
I'm just looking at the 1 wire connector. It looks like the KS one. Most A/C pressure connectors had 2 wires, except earlier ones that didn't have the "Recirc" button, which are NLA.If you look close at the pigtail, where it disappears into the harness convoluted tubing, that connector would not reach there.