Recent content by UsernameRequired

  1. U

    Fuse help

    Hello everyone, my search skills maybe failing me, but I have a 1994 c1500 recently replaced the blower motor, replaced the ac controller, the ac was now working great until on a long trip it started blowing the ac fuse. It never popped the fuse with the old blower motor but it barely worked...
  2. U

    Clutch issue.

    02 slave 96 hydraulic line from master power torque part numbers
  3. U

    Clutch issue.

    As of today, I resolved the problem and the truck is back on the road. I always try to post my solutions incase someone else searches out the problem, and comes across the thread. (too many times have I found a thread on a problem with no solution) I ended up buying the slave cylinder for an...
  4. U

    Clutch issue.

    I've been thinking the same thing, and it appears to be spring loaded... You can see it in one of the pictures
  5. U

    Clutch issue.

    The valve in the end of the hose becomes, stuck once the pedal starts to build pressure and will no longer flow fluid. Take the hose off press on the valve it pops, fluid starts to flow. I bought a new slave cylinder today and different cable, once I pull the transmission and install...
  6. U

    Clutch issue.

    The replacement gm parts have the same fittings just too short. At this point I almost want to switch transmission to one with an external slave. Haven't dealt with an internal slave until now...I have mixed feelings
  7. U

    Clutch issue.

    Brief history c1500 started life as 4.3 auto, now 5.7 manual. Now the trouble driving the other day, and the clutch pedal became hard as a rock and would move maybe a half inch, then the push rod for the master cylinder broke. Master cylinder has been replaced but once hooked up to the...
  8. U

    No heat with Big Radiator and Electric fans

    This may sound crazy, but I lived it. My truck (engine swapped to 350 carb) had no heat, both hoses to the heater core were connected to returns on the water pump and radiator (they'd get hot as well). I had to move a hose to the intake and boom I now have really good heat. I mentioned because...
  9. U

    Am I in the right place?

    I thought I would finally update this as the reason has finally been found! After $1200, studying the service manual, and watching several front end rebuilds on YouTube. It turns out that whomever rebuilt the front end put the center link on backwards, which moved the tierods (also backwards)...
  10. U

    Am I in the right place?

    info on this one really varies greatly it started life as a 4.3 auto and is now a 350 5sp. It's an ext cab 2wd the alignment was "done" after the front was rebuilt about 1 month before I purchased it. Don't know the brand of tire but they are 275/60/15 all around. Alignment was done at a local...
  11. U

    Am I in the right place?

    So today I took out the truck my first real time driving it with any distance/time and lots of stop and go here's some issues. Transmission we've lightly touched on this one, but now I think it might not be the trans, as it seems to shift fine it seems more now as if the hydraulic clutch just...
  12. U

    Hello from Florida

    The existing transmission does have it's problems, second likes to randomly pop out...usually In traffic you know when ya need it lol and third isn't happy. As I start doing more to it I'll definitely put a build thread up
  13. U

    t5 swap

    Not trolling at all, just with budget and necessity (already have the t5) was genuinely curious.
  14. U

    Hello from Florida

    Recently picked up this lump of coal, that hopefully one day might be a diamond (driver right now as I have another project) Started life as a 4.3 auto that's been converted to 350 5sp. Not sure of much of the history I feel at one time she was loved and then fell to the wayside.
  15. U

    t5 swap

    I'm curious about a t5 swap myself, I recently purchased 94 c1500 that was converted from 4.3 auto to 350 5sp the transmission has some issues, I have a t5 and have been thinking about using it for a temporarily permanent solution. (Hopefully this doesn't count as a hijack just looking for the...
See more

Latest posts

Members online

... and 5 more.
Total: 1,628 (members: 55, guests: 1,573)

Forum statistics

Threads
64,505
Messages
1,395,380
Members
51,845
Latest member
GMACGMC

Share this page

Top