Spareparts's latest activity
-
That's awesome you even tried that!!! That was one motor that was "bench raced" with me and my buddy. But I know/knew nothing about them... -
Spareparts reacted to Schurkey's post in the thread 1993 Yukon crate motor hydraulic roller lifter cleaning and adjustment journey - (Solved) with
Like.
Refresh my memory...is this a rebuilt engine? Does it have vented oil gallery plugs at the front of the block? GM started putting... -
Spareparts replied to the thread GOT a van!.Got the old cap rotor changed today and it was not pretty. Surprised i had no misfires after see the inside. I wanted to see what the...
-
-
Spareparts replied to the thread GOT a van!.I did not take a pic of the other side of the ecu circuit board but it was way worse than the top? (posted pic). It was bridged all over...
-
So first off, you have to realize none of us here are mind readers. A few of us understood what you mentioned by amps when you said it...
-
Spareparts replied to the thread GOT a van!.Here is the reading you asked for. KOEO before start up. I dont know what the ambient outside temp was but it's 45 out now so i imagine...
-
-
Hello Spareparts, "Start CLNT (F)" is the way your Scan tool reports the ECT (VCM coolant temp sensor) that is taken immediately after...
-
Spareparts replied to the thread GOT a van!.Thank you for the link and info. I still have not got the tuneup done as it is running fine since the ecu was changed, So working on...
-
Spareparts replied to the thread GOT a van!.Finally got the defrost fixed now that winter is almost over. Turned out to be a bad vacuum actuator. PITA to get to. Had to remove the...
-
-
A type that is more a lube and less solvents. Aerokroil, crc power lube, don't remember the name, red and white spray can also...
-
Shopping for a scan tool. MT 2500 best choice? I have the 92 in question and this 93 yard find I am trying to get on the road. Last...
-
Spareparts reacted to smokymtn65's post in the thread 96 burb 7.4 misfire after 5.0 injectors with Like.
So frustrating to get new parts that are junk. Glad you found the issue.
-
Spareparts replied to the thread Anyone ever change out a crank position sensor?.The easiest way i found to measure the depth was with a micrometer. Measure from the timing cover where the CPS goes into it and make...
-
Spareparts replied to the thread Another LS swap question.Around here 6.0 is hard to find and when ya do people think it's a 450lb brick of gold.
-
Spareparts replied to the thread GOT a van!.Totally the opposite for me. I have never lowered a vehicle. I don't even know how long it's been since the last 2wd i owned. I dunno...
Staff online
-
df2x44L60E Destroyer
Members online
- WoodsMD
- vince72
- 7597NHRA
- Scooterwrench
- Caman96
- CruiseLifeB
- Nick88
- tdawglp93
- termite
- kawamatt2
- Crawlblind
- threedare
- Road Trip
- Steverino
- offroadtahoe
- hunterkeslar89
- Thatold350
- Greenbastard95
- plasmapete
- bigshane
- Jroctizzle
- docstoy
- Joe Nelson
- AFoldedLawnChair
- hillbilly269
- Schurkey
- OlSarge
- jinks67
- pandatruck
- F0rdSlayer
- Supercharged111
- Komet
- Jobpartson009
- Kwades
- SheMoansObs
- df2x4
- grampadirt
- 1991dozer
- fancyTBI
- DZL01
- Sideburnz
- TechNova
- EastAZfab
- PlayingWithTBI
- elky454
- texasil
- smdk2500
- 813Shawtbed
- JPVortex
- TylerZ281500