Schurkey's latest activity
-
Schurkey replied to the thread Cap & Rotor.Near forever, IF the coil doesn't get overloaded/excessive secondary voltage due to failures of the plug wires or some copulating... -
Schurkey replied to the thread Slight knock?.Thanks for that. An excellent mental picture. The voltmeter on my truck is an example of that. Lately the needle has been randomly...
-
Everything Shurkey said plus A bad exhaust gasket or a cracked exhaust manifold can sound like a rod knock and then get less noticeable...
-
Schurkey replied to the thread Slight knock?.You notice that in my previous post, "Rolls-Royce" was in quotation marks. Yes, the Vortec 5.7L core short-block I rebuilt for my '88...
-
Schurkey replied to the thread 700R4 Information Thread.I'd be looking at the tag or numbers embossed in the trans case...but maybe there's an easier way.
-
Make sure you're buying a 2001-2006 4L65E or 2007-2013 4L70E if wanting the 5P planets, not a 4L60E as they have the same 4-pinion...
-
Schurkey replied to the thread 94 k1500 brake shoe and drum size.I'm pretty sure that when I ripped-out my 8.5" axle in favor of the 9.5" semi-float, that I re-used my existing park brake cables. I'm...
-
Schurkey replied to the thread starter bendix gremlin.Doesn't matter if the terminals are loose. Either the starter solenoid works to pull the starter drive into engagement with the ring...
-
Schurkey replied to the thread Slight knock?.GM assembles the engines with the option of using bearing shells in half-a-thou increments. For example, you might get a standard...
-
Schurkey replied to the thread 94 k1500 brake shoe and drum size.You could measure the grooves to see if the drum is beyond it's machining diameter...but...I'm with Caman96. It's almost certainly...
-
-
I have no doubt it destroyed your drum.
-
Schurkey replied to the thread No Brakes!!! Dangerous ride home..I had a '66 Biscayne as my first (hand-me-down) car. Mom bought it new, I got it ten years later. Needed a master cylinder. Pedal...
-
I don't think dual bowl master cylinders were mandated until 1967, So if it was a 65, you get a leak and lose all your braking!
-
Schurkey replied to the thread Confirmed brake bleeding scan tools.Iron-body RWAL has it's own dedicated bleeder screw. '87 (Squarebody), '88--'90(?) Aluminum-body RWAL does not have a bleeder screw...
-
Schurkey replied to the thread Looking for Ignition recommendations....Copper corrodes readily. Or greenily, depending on your sense of humor. Alchemist sign for iron. Astrology sign for Mars. Gender sign...
-
Staff online
-
df2x44L60E Destroyer
Members online
- Mr Eric
- Caman96
- Kejob
- El Coqui
- ljenny910
- Chevyman1969
- Walterchang
- Shane B
- Bigdawg51
- Lyonsperf
- bluex
- Roaddog
- 0xDEADBEEF
- Blue91
- GrimsterGMC
- name
- man-a-fre
- termite
- PlayingWithTBI
- Thatlowchevy
- El Tigre
- Backyard Restorer
- Protegenoob17
- jm101
- LadyJ
- Charlesteneows
- Country44
- calebsrepair
- MarKist
- packer0440
- AK49BWL
- ernieglez1980
- docstoy
- weatherman330
- gurtomoreno
- VIKING_MECHANIC
- pgutier1
- df2x4
- 99xcss4
- 94TBI
- L31MaxExpress
- Austin9372
- Macs Garage
- LIT94SS
- 98chevyblue
- 98tahoe4dr
- Remodelmaster
- Orpedcrow
- Nad_Yvalhosert
- bluecollarclassiccar