docstoy's latest activity
-
Ddocstoy replied to the thread IAC counts high.36 on cam gear, that's 10 degrees
-
Ddocstoy replied to the thread IAC counts high.How many teeth on cam gear ? Could be a tooth off.
-
Ddocstoy replied to the thread Front end rebuild.Bolt in upper and lower . I would have thought lowers would be different. Things that make you go hmmm!!!
-
Ddocstoy replied to the thread 305 tbi starts , immediately stalls, runs good on 2nd start?.You first need to remove fuel from tank or drive it till its low. Don't know what kind of luck you will have with putting a 10 foot hose...
-
Ddocstoy replied to the thread Front end rebuild.Sorry again, I have 1993 k2500 8 lug 8600 gvw, so the lower ball joints are the same for 7200 - 8600 ?
-
Ddocstoy replied to the thread Front end rebuild.Yes I ck'd there website and all I saw for lower ball joints was for 7200gvw , correct me if I'm wrong or may have just overlooked them...
-
Ddocstoy replied to the thread 1994 5.7 idle too low.If you haven't bought a scanner yet, does your timing light have a display on it that shows rpm ? Or do you have a tach/dwell meter ...
-
Ddocstoy replied to the thread 1997 5.7 Vortec misfire/stumble.Did spark plugs all look the same ( build up of any kind ) or pull your O2 and inspect make sure it doesn't have any buildup .
-
Ddocstoy replied to the thread 305 tbi starts , immediately stalls, runs good on 2nd start?.And for you to have a big Ole smile on your face because you didn't quit because of frustration or aggravation before you took the 5 lb...
-
Ddocstoy replied to the thread 305 tbi starts , immediately stalls, runs good on 2nd start?.Reason I said re/ck your fuel filter after running cleaner is if restricted again then fuel tank need to come out and cleaned along with...
-
Ddocstoy replied to the thread Front end rebuild.Do you have part numbers for mevotech ttx upper/lower ball joints my 1993 is also 8 lug 8600 gvw ? So far no one showing 8600 gvw for...
-
Ddocstoy replied to the thread IAC counts high.Which side is map on ?
-
Ddocstoy replied to the thread 305 tbi starts , immediately stalls, runs good on 2nd start?.Just looked search forums with data scanners looks like plenty of reading
-
Ddocstoy replied to the thread 305 tbi starts , immediately stalls, runs good on 2nd start?.Can't answer that question , I have gm tech 2 scanner
-
Ddocstoy replied to the thread IAC counts high.If you have full vacuum to pcv and vent tube on other valve cover is not clogged and vacuum is steady, I would say replace, rattle could...
Staff online
-
df2x44L60E Destroyer
Members online
- El Tigre
- b1jetmech
- redd29229
- Peavey
- Tyler1989
- Scooterwrench
- zampman
- amar
- ObsCam
- Turbo86
- Cng2500hd
- 1ton-o-fun
- rehoward
- Aussie Silverado
- Mike556
- Greenwood90
- gearhead9663
- Papikev252
- Wildcat465
- eddie1712
- Das Hatt
- Lsswapguy
- ricknoss
- Bigfender
- Ampedracing
- bubbz22
- termite
- MrobsMan
- g00se
- Getwah
- cpetersen21
- Caman96
- Steca005
- movietvet
- 1990K2500Fan
- Anchor
- jasolhe
- Drunkcanuk
- Cody-Love
- Alteca
- df2x4
- VIKING_MECHANIC
- i taz
- alvaroemg
- Miguel1998 tahoe
- T3B3
- GM Guy
- hekg
- 96obsyukon
- evilunclegrimace