Bob2650's latest activity
-
BYep, makes sense. Will likely keep it at 3.73 don’t need to throw anymore money at this truck.
-
BBob2650 reacted to Road Trip's post in the thread What makes these trucks destroy distributor caps/rotors? with
Like.
Looks like somebody forgot to tell this guy that the 292 straight 6 was only good for pulling heavy loads at low speed: :) That... -
BBob2650 reacted to Schurkey's post in the thread What makes these trucks destroy distributor caps/rotors? with Like.
Ozone,moisture, crankcase gasses, nitric acid...would affect EVERY terminal in the cap, not just #5. The problem with #5 is probably...
-
BBob2650 reacted to Caman96's post in the thread New gmt 400 owner, wondering what these are for with Like.
All this time you thought you had surface to air missles. ;)
-
BBob2650 reacted to L31MaxExpress's post in the thread 12200411 PCM swap for 1996 to 2000 GMT400 trucks with Like.
If I have time, I will throw together a HPT file for a 350 later with the correct MAF curve and injector data for the MPFI upgrade as...
-
BBob2650 replied to the thread Found this when changing rear diff oil!!.I would guess the backlash is big and a bad wear pattern has already become established. 3.73 is probably the second most common 3/4 ton...
-
BWhen you pull up a part at RA, 9 out of 10 times, you can click on the "more info" blue sticker and then it typically shows all the...
-
BRock Auto - a pretty good online parts dealer with extensive stock. A lot of us use them frequently. Not always the best price but...
-
BAs " someotherguy" stated above, the RPO code text calls it a " positraction differential" , Remember the code is a general...
-
BThese guys already covered it, no friction modifier or additives required for anything that came stock in these truck axles. GM...
-
BBecause people keep calling it the wrong thing. It's a locker, not a "posi" and this one gets beat into the ground even after you show...
-
BIt does not take additive. The G80 does not need a friction modifier like a true LSD does. Use regular 80W90
-
BDon't chase after the timing chain,. unless its worn a hole in the cover it'll run fine sbc pretty bullet proof,. use a strong LED light...
-
BBob2650 replied to the thread Found this when changing rear diff oil!!.Take a close look at both faces of every gear tooth with bright light. (and reading glasses if your over 40) Would be a miracle if none...
-
BTruck running rough? Maybe you want to throw some parts at the 'ole girl to make it right. But which part? There are so many. Perhaps...
Staff online
-
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.
Members online
- kennythewelder
- lit549
- PCMusicGuy
- Caman96
- TheDogsSuburban94
- Obsbray
- Schurkey
- squeasel
- Machlen
- 99xcss4
- Road Trip
- Komet
- TylerA245
- fancyTBI
- 4x4animalstyle
- alabbar
- 1998_K1500_Sub
- ivankelly
- rangokatt
- 97-2door
- WojTec
- SerStarfish
- mxmxmc3000
- Minn95Dually
- Nad_Yvalhosert
- Connorpod
- CFS176
- Rexall
- THE CALI FLASH
- JPVortex
- Ryanstokes8
- GrimsterGMC
- Austindarksaber
- Teddysvam
- SNCTMPL
- NCroger
- Carlaisle
- IndexOf0
- Aqua-pig
- scott2093
- Supercharged111
- Zack8
- whewshikaw
- Alteca
- SuperSpore
- someotherguy
- Wh4t3v3rs
- Drunkcanuk
- billmack7
- WrenchAndRatchet