BoxerPitMix
Chris
Thanks! Yes there's no wiring running to the switch on the dash, I'd love to wire it back up but I have no idea where to start!
I've installed a few of those years back at my old job... It looks like the same manufacturer I used to install judging by the switch.
If that's the case, I drew up something on MSpaint for you to go by. Don't be jealous of my mad artistic skills
2 wires come from the regulator motor. (+) and (-). If they aren't labeled/colored it really shouldn't matter which goes to which. If you wire it up and when you push left on the button and it goes right - just switch the two around and that should fix it.
On the switch (the lower square - I forgot to label it) I think there were 5 connections. The outer two are the + and - from the regulator motor. The next two inside connections are both grounds, and the center will be your fused power coming from the battery or some other power source.
You must be registered for see images attach