Post your lifted 2wd's!

[Daly]

My spindle lift is in, but I'm not gonna have time for a few weeks to install it. I do have a question though. I have a set off 18x9 0mm offset rims for summer, which I'm thinking will fit (I hope), but I was wondering if the stock 16x6 rims with 4" BS will work for winter duty?

 

[cjman250]

My spindle lift is in, but I'm not gonna have time for a few weeks to install it. I do have a question though. I have a set off 18x9 0mm offset rims for summer, which I'm thinking will fit (I hope), but I was wondering if the stock 16x6 rims with 4" BS will work for winter duty?

If they're factory they should clear

 

[95C1500]

16x6? What wheels are they?

 

[Daly]

They could be 16x6.5, the tires are still on them and couldn't get a good measurement on them… As far as I know they are the stock 16" steels that came on the c2500 6 bolt trucks…

 

[oohunter04oo]

They could be 16x6.5, the tires are still on them and couldn't get a good measurement on them… As far as I know they are the stock 16" steels that came on the c2500 6 bolt trucks…

You'll probably need spacers. Most of the 6lug wheels have a lot less backspacing.

 

[Daly]

I measured 4", where does the back spacing need to be with the spindle lift? Will my 18x9's with 0mm (5" BS) offset work?

I have a set of 1/4" spacers and 1.5" spacers in the garage, I'm guessing one of these will work…

 

[cjman250]

I measured 4", where does the back spacing need to be with the spindle lift? Will my 18x9's with 0mm (5" BS) offset work?

I have a set of 1/4" spacers and 1.5" spacers in the garage, I'm guessing one of these will work…

Quarter should be fine

 

[Daly]

Ok, thanks guys… I hope to have time to do it earlier then after Labour day, but works busy and I wanna get the Coronet home more…

 

[project 67 sub]

updated one of mine with my new to me glass fenders which i picked up for $150, and put a $4 paint job on to make them half ways match instead of leaving them white. and yes, i know it really needs some tube bumpers and stuff now. lol. probably gonna trim the front one up some more for now.

You must be registered for see images attach

You must be registered for see images attach

 

[AbramF_496]

What a deal on those fenders man


Sent from my iPhone using Tapatalk