My LS swap in 2 dr 2 wd tahoe

[Whipped96]

North of Kingwood in Porter.

Sux how far you have to go to get a little property. Bought 1.5 acres and built a house in 2013.

My dad lives in Kingwood, next time I'm out that way I may see if you have time to get together.

I'm just south of Clear Lake and this area is getting ridiculous, if my wife didn't want to be so close to her parents (5 miles away) I would move out that direction.

 

[99kon]

It's the reason I moved out there. But it is starting to get congested. Nothing like your area though, its the last not too congested area in town. I live in an acreage community called Riverwalk. Its very nice and quiet, but with a POA. Which is not a bad thing at times. Helps keep the hood looking nice.
Ill message you my number. Let me know, we can cook some cow and have some beer!!

 

[Whipped96]

Sounds good!

 

[99kon]

Fuel sender shouldn't have been messed with at all, so maybe you lost a ground or something. The Temp sensor is because the LS series uses the temp sensor much more than the TBI or vortech PCMs did. The only reason the 3 wire sensor you need even exists is because GM was lazy about updating the dash temp readout for a couple years. lol

So i have been searching and searching but have not found anything that tells me why my fuel gauge does not work. I installed the 0411 PCM that was running the truck before the swap and the fuel gauge works fine. I looked at both tunes and my current 0411 PCM is missing some parameters that the 0411 350 tuned PCM has in the fuel system tab.
How would i go about flashing the tune or missing cells from one PCM to the other?

 

[99kon]

I dont have the PWM enable tab or the HZ cell
I guess its called segmenting?

 

[Whipped96]

This help??

http://ls1tech.com/forums/pcm-diagn...rmation-0411-fuel-segments-98-fuel-gauge.html

 

[99kon]

Well
Not really. If that is what segmenting is then I know HP Tuners cant do that. If you look on post #6, I don't have that in the current tune i have.

 

[Whipped96]

I'm on my way to the speed shop. If my tuner is there I'll ask him if he has any idea why it's not working.

 

[99kon]

Mention that there is some drop down and enable/disable buttons (i guess you can call them that) that are on one PCM that I want on the other PCM

 

[Whipped96]

He was to busy for me to get to see him face to face. If you haven't figured it out by the time I go back up there I'll ask him then, sorry man.