NacIK
aka Dirty Hoe
I replaced the rear springs on my Tahoe because they looked fatigued. They looked like they were bending in the opposite direction. I ordered new ones from RockAuto and installed them a few weeks ago. The truck rides better and a lot of the sway is gone, but the springs look completely flat. Also I have not cranked the torsion bars but the front looks higher than the back by about an inch. I thought these came with factory with a slight rake? I could have been cranked by the previous owner though.
Could someone with a Tahoe take a look at their rear springs and see if there is any bow in them? I looked at a Silverado the other day and they were bowed but they were 2500 springs and helpers installed.
Here is a pick I took the other day so that you can see what I mean about the height difference.
I do have two different tire brands (on the broke side this year) but they are the same size according to the sidewall. Hopefully I will have a spare $600 this year for some AT3's! Can't really beat them for only $110 a tire.
Sent from my iPhone using Tapatalk
Could someone with a Tahoe take a look at their rear springs and see if there is any bow in them? I looked at a Silverado the other day and they were bowed but they were 2500 springs and helpers installed.
Here is a pick I took the other day so that you can see what I mean about the height difference.
You must be registered for see images attach
I do have two different tire brands (on the broke side this year) but they are the same size according to the sidewall. Hopefully I will have a spare $600 this year for some AT3's! Can't really beat them for only $110 a tire.
Sent from my iPhone using Tapatalk