The Center Console Thread

[AirmanSkee]

I guess I should post up in here, it would help out the guys looking for jumper seats.

I have 50/50 buckets, with a custom center console/jumper seat. Three cup holders, that fold up to a backrest and has a center lap belt.

You must be registered for see images attach

You must be registered for see images attach

And then the bottom cusion flips forward to reveal a storage compartment.

You must be registered for see images attach

The whole thing is on its own slider to move separate from the seats, and wrapped in OEM fabric to match. You'd never know it wasn't stock unless you knew what you were looking for.

 

[AirmanSkee]

You must be registered for see images attach

 

[gmcyukondriver]

Skee, where did you get the OEM matching fabric? I figured it would be almost impossible to find. I have a sub under my front seat, and I'd love to wrap the box in that so it would almost be invisible.

 

[AirmanSkee]

I didn't make the console, it's actually made by one of the many conversion companies they had back in the 90s. I have a link to it I will have to dig up later tonight after work. It's about a ~450$ console before shipping.

 

[craig98]

craig the console i strongly reconmend is out of a 99 denali or escalade suv's i had a heavy sub box with 2 12' in back after hooking this wonder
sub up i took the box out and 2 kenwood 500 rms amps less weight and more cargo space that i missed this should work in your pickup.

Alright thanks man I will keep a eye for one to pop in the junkyards.

 

[RynoHarris]

Finally got my console installed today. Didn't fit with the Bose sub installed over the 4x4 floor shifter sadly but dit perfect with out it. There's a slight gap between the dash and the end of the console. With have to do some fab work to it still, but its a start. Also have to paint it to match the interior still.

You must be registered for see images attach

that's not pushed all the way forward but gives you an idea compared to the stock console.

Sent from my HTC One X

 

[ccreddell]

I LIKE!!

 

[RynoHarris]

Thanks. Its making drinks a lot easier to keep in there lol I'm thinking of cutting out part of the cupholders and putting plexiglass there with some LEDs beneath that for accent lighting

Sent from my HTC One X

 

[qukon 95]

Man !! that's going to take alot of work to close the gaps at the dash post pics after your done.

 

[RynoHarris]

Yeah, haven't had the time to get into yet. Its actually not looking like it will be too difficult. Once I remove the factory 12v CIG plug and ashtray assembly it leaves me a good 2-3" to push the console into. The pockets at the front of the console conveniently line right up with the hole it will leave. I'll have to trim some on the drivers side. And a little on top. But other than that it should slide up to the dash pretty easily. That's always the plan though isn't it? Haha

Sent from my HTC One X