tail lights

[kamokevin]

Yup, exact same as mine without tint.

Also guys, you need to either wire in resistors or get an LED flasher so you don't have hyperflash. Resistors take a little work, but you can buy them at any O'reillys or Autozone in the bulbs section next to the extremely expensive LEDs. I got my flasher from Autolumination for I think $14 and I can put LEDs in all my housings without hyperflash.

I didn't need one. Just plug and play for me

 

[95C1500]

so it installs under the dash with the other relays?

 

[jdyates]

I didn't need one. Just plug and play for me

Then yours already had one or an HD flasher.

so it installs under the dash with the other relays?

Yup, pop the old one out, new one in. If you want to know which one it is, turn on a turn signal and touch each relay under the dash until you feel one clicking.

 

[95C1500]

Yup, pop the old one out, new one in. If you want to know which one it is, turn on a turn signal and touch each relay under the dash until you feel one clicking.

alright. Thanks a to. Is the one from lmc the right one? or are there different kinds?

 

[jdyates]

alright. Thanks a to. Is the one from lmc the right one? or are there different kinds?

I got mine from autolumination.com, and yes there are different kinds. If I remember correctly, mine is an EP36 and yours is an EP29 with the new dash BUT you need to double-check cause I could be wrong. Just pull yours out and compare the prongs.

 

[95C1500]

ok thanks a ton. Gotta bookmark this info haha

 

[jdyates]

ok thanks a ton. Gotta bookmark this info haha

Just went out and checked, mine is the EP36, so yours SHOULD be the EP29. Here's the page: http://autolumination.com/equalizers.htm

 

[95C1500]

Ok thanks. I'll check tomorrow

 

[whip16]

those look nice how much and i dont need the third brake light 93 or older burbans didnt have them

I think $240 but worth the money sae/dot complaint ... plug and play has everything for led built in

You must be registered for see images attach

You must be registered for see images attach

Sent from my iPhone using Tapatalk 2

 

[95Escahoe]

I didn't need one. Just plug and play for me

Aslong as you dont have leds in any of your other exterior lights its 100% plug and play these tail lights have the resistors built in

Sent from my HTC One X using Tapatalk 2