Upper corner lights

[TruckinAin4Sissies]

Thanks! It didn't work out exactly like I wanted but turned out ok. There is a lot less room to work with on a gmc grill/light.

Maybe so, BUT (GMC) lights still have potential

Bottom

You must be registered for see images attach

Top

You must be registered for see images attach

TA4S

 

[bluex]

Ahh I see. I was actually wanting to switch to a GMC with billet, or do the billet inserts on mine and redo my bowtie again. Havent decided. I do know I want to do this mod though. It blinks with the lower as well, correct?

Ya they both blink together with the signal/hazards. I just spliced into the wiring for the lower corner light...

 

[bluex]

Maybe so, BUT (GMC) lights still have potential

Bottom

You must be registered for see images attach

Top

You must be registered for see images attach

TA4S

when you making me a set again?

 

[AirmanSkee]

Ya they both blink together with the signal/hazards. I just spliced into the wiring for the lower corner light...

Awesome that was my plan too.

 

[Blakestuhh]

This will probably sound stupid but what do I need to secure these to the grille!? I did the swap from 88-93 to 94-98 Gmc and dont have anything to use. Is there a place to order something?

 

[96k1500]

This will probably sound stupid but what do I need to secure these to the grille!? I did the swap from 88-93 to 94-98 Gmc and dont have anything to use. Is there a place to order something?

Im not understanding what you mean, you switched to the newer grill but not the corner lights? If so you need to order the new corner lights for it or are you meanin the hollow nuts that you can get from aitozone that hold the corner lights in?

 

[Blakestuhh]

Yes I ordered the corners for the year, my old one was a single sidemarker. But when i put the lenses in the grille i have nothing on the back to hold them in. Im guessing Im going to need a nut but i cant seem to find any?

 

[96k1500]

Yes I ordered the corners for the year, my old one was a single sidemarker. But when i put the lenses in the grille i have nothing on the back to hold them in. Im guessing Im going to need a nut but i cant seem to find any?

They just take a hollow nut, you can buy a pack of them at autozone or if you need to go to a pull it yard you can stick them in your pocket

 

[Blakestuhh]

Thanks for the help!

 

[sewlow]

go to a pull it yard you can stick them in your pocket

Good thing that the wreckers don't have a scale at the door to weigh customers as they enter & leave. I'm always a pound or 5 heavier on the way out!