First day turning wrenches in the shop in Junction City, Or. The 2006 F150 4x4 5.4 engine is being replaced and the transmission rebuilt with a new torque converter. I started at 10 am and stopped at 1 pm. Bagged and tagged the fasteners as I tore down and will be doing a cleanup on components that will be reused. Look at the flapper plates for the intake. I shot pics of all 4 on d/s and the other 4 looked the same. We are getting a new intake and actuator for the plates. This is getting many new parts as we go: Throttle body, radiator, fan blade and clutch, injectors, plugs, ignition coils are less than 6 months old-I installed them a while back for a misfire code, all mounts, belt, tensioner, idler, water pump, new reman FORD engine, oxygen sensors, a/c condenser, trans cooler, knock sensors, cam and crank sensors, receiver drier, hoses, accumulator, flushed a/c system, new transmission cooler lines, temp sender and sensor, MAF, purge valve, fuel filter, fuel pressure sensor and I am sure I have forgotten some things....
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach