Rear Drum to Disc Conversion kit questions.

[Bigmone]

Are there any bolt on brackets available?I know everybody doesn't have a welder

 

[kevhill85]

Are there any bolt on brackets available?I know everybody doesn't have a welder

I drilled two hole into the weld on bracket. It has worked fined for 1 1/2 so far

 

[clkelley]

Just putting this out there....

http://www.syntheticmotorsports.org...conversion-kit-installation-instructions.html

 

[956moe]

Just putting this out there....

http://www.syntheticmotorsports.org...conversion-kit-installation-instructions.html

vBulletin Message
No Thread specified. If you followed a valid link, please notify the administrator

 

[clkelley]

vBulletin Message
No Thread specified. If you followed a valid link, please notify the administrator

Yeah. um, we've been hacked, the entire DIY section is gone now. Sorry guys, I will have to work on this.

 

[clkelley]

Ok, luckily I had built an article to promote that particular thread so for now you can view the link pasted above and below, but until I do a back up restoration you will not be able to view the images. Sorry for the inconvenience guys...

http://www.syntheticmotorsports.org...conversion-kit-installation-instructions.html

 

[bowtie-till-i-die]

So does any1 know what calipers in can use for the rears? With e-brake. I'd rather not spend 100 for 1 calipers. Any1 done this or mastered it should I say?

 

[sewlow]

Ok, luckily I had built an article to promote that particular thread so for now you can view the link pasted above and below, but until I do a back up restoration you will not be able to view the images. Sorry for the inconvenience guys...

http://www.syntheticmotorsports.org...conversion-kit-installation-instructions.html

Link still no worky.

 

[///RAGMC]

I have a set of 5 lug rear rotors for sale if anyone is looking for some

 

[sewlow]

With an E-brake provision?